|
Usuarios conectados
Actualmente hay 5876 visitantes online.
|
Productos
|
Información
|
Destacado
|
|
|
|
|
No hay comentarios de productos.
� This receiver cannot play back the following files: � MP3 files encoded with MP3i and MP3 PRO format. � MP3 files encoded in an unappropriated format. � MP3 files encoded with Layer 1/2. � WMA files encoded with lossless, professional, and voice format. � WMA files which are not based upon Windows Media® Audio. � WMA files copy-protected with DRM. � WMA files recorded with MBR (Multiple Bit Rate) format. � Files which have the data such as WAVE, ATRAC3, etc.
ENGLISH
DVD setup menu
� When the language you have selected is not recorded on a disc, the original language is automatically used as the initial language. In addition, for some discs, the initial languages settings will not work as you set due to their internal disc programming. � While playing (or pausing), you cannot change these languages. After you change any of these language settings, eject the disc and insert it (or another disc) again so that your setting takes effect. � When you select �16:9 [MULTI]� for a picture whose aspect ratio is 4:3, the picture slightly changes due to the process for converting the picture width. � Even if �4:3 [MULTI] PAN SCAN� is selected, the screen size may become �4:3 [MULTI] LETTER BOX� with some DVDs. This depends on how they are recorded.
Changing the source
� If you change the source, playback also stops (without ejecting the disc). Next time you select �DISC� for the playback source (without activating Dual Zone), disc play starts from where it has been stopped previously.
General settings�PSM
� If you change the �AMP GAIN� setting from �HIGH PWR� to �LOW PWR� while the volume level is set higher than �VOL 30,� the receiver automatically changes the volume level to �VOL 30.�
Ejecting a disc
� If the ejected disc is not removed within 15 seconds, the disc is automatically inserted again into the loading slot to prevent it from dust. (Disc will not play this time.)
Other main functions
� If you try to assign a title to a 31st station or 31st disc, �NAMEFULL� flashes on the display. Delete unwanted titles before assignment. � Titles assigned to discs in the CD changer can also be shown if you playback the disc on the receiver.
52
|
|
|
> |
|