JVC KD-ADV6160
Manual de Servicio

3.2.10 Removing the spindle motor (See Fig.20) � Remove the mechanism control board. Remove the two screws L attaching the spindle motor on the bottom of the body. Caution: Perform adjustment when reattaching the spindle motor.

Spindle motor

L
Fig.20 3.2.11 Removing the feed motor assembly (See Fig.21 and 22) � Remove the mechanism control board. (1) Remove the feed TRI. spring on the bottom of the body. (See Fig.21.) (2) Remove the two screws M attaching the feed motor assembly. (See Fig.21.) (3) Remove the slit washer from the motor H. assembly and pull out the worm wheel. (See Fig.22.) Remove the two screws N attaching the feed motor. (See Fig.22.)

M
Feed TRI. spring Feed motor assembly

Fig.21

Slit washer

Worm wheel

Feed motor

N

Motor H. assembly
Fig.22 (No.MA153)1-19