KENWOOD KAC818
Manual de Usuario

Safety precautions
2WARNING NOTE

To prevent injury or fire, take the following precautions: � When extending the ignition, battery, or ground wires, make sure to use automotivegrade wires or other wires with a 5mm 2 (AWG10) or more to prevent wire deterioration and damage to the wire coating. � To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit. � If the unit starts to emit smoke or strange smells, turn off the power immediately and consult your Kenwood dealer. � Do not touch the unit during use because the surface of the unit becomes hot and may cause burns if touched.
2CAUTION

� If you experience problems during installation, consult your Kenwood dealer. � If the unit does not seem to be working right, consult your Kenwood dealer.

Cleaning the unit
If the front panel gets dirty, turn off the power and wipe the panel with a dry silicon cloth or soft cloth.
2CAUTION

Do not wipe the panel with a hard cloth or a cloth dampened by volatile solvents such as paint thinner and alcohol. They can scratch the surface of the panel and/or cause the indicator letters to peel off.

Accessories
Part name
Round terminal (Large) Round terminal (Medium) Round terminal (Small) Terminal cover (Power terminal) Self-tapping screws (ø4 �16 mm)

External View

Number of Items
1 2 1 1 4

To prevent damage to the machine, take the following precautions: � Be sure the unit is connected to a 12V DC power supply with a negative ground connection. � Do not open the top or bottom covers of the unit. � Do not install the unit in a spot exposed to direct sunlight or excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing. � When replacing a fuse, only use a new one with the prescribed rating. Using a fuse with the wrong rating may cause your unit to malfunction. � To prevent a short circuit when replacing a fuse, first disconnect the wiring harness.

2

English