Please note If you do not press any buttons for 15 seconds the TV will exit the menu system. In the Setup menu select PROG NO and change to P1 using the Program down button to select it and the Volume up button to change it. Starting with Program 1, tune in the first channel as follows: Use the Program down button to select SEARCH. Press the Volume up or Volume down button to start the tuning search. When the search finds a strong channel signal it will stop searching. The picture will appear. Identify which channel you are watching (BBC 1, ITV 1 etc.) and decide which program number you want it to be. Use the Program down button to select PROGRAM NO. Use the Volume up/down buttons to select the program number. Use the Program down button to select Store. Press theOK button and STORED will appear on the STORE line. You have now stored the first channel. Use the Program up button to select again SEARCH and continue the tuning procedure until you have tuned in all the programmes you want or the television can receive.
Tuning with channel numbers Enter the SETUP menu by pressing the blue button. Press the OK button to enter the CHANNEL row. Use the OK button to select �S� for cable channels and �C� for terrestrial broadcast. Use Volume up button to select the channel number buttons. Enter the channel number using the Numeric buttons. Press the Program down/up buttons to exit the channel row. Use the Program down button to select PROGRAM NO. Use the Volume up/down buttons to select the program number. Use the Program down button to select STORE. Press the OK button and STORED will appear on the STORE line. You have now stored the first channel. Use the Program up button to select again SEARCH and continue the tuning procedure until you have tuned in all the programmes you want or the television can receive. To exit the SETUP menu press the TV/TX button. Automatic tuning (Autoprogram) Enter the SETUP menu as before.
