PLAYBACK Advanced Features For D.S.C.
Protecting Images
The Protect mode helps prevent the accidental erasure of images. When a padlock mark is displayed next to the Picture Quality indication, that image cannot be deleted.
Power Switch
1 2
Lock Button
Set the Power Switch to � � while pressing down the Lock Button. Open the LCD monitor fully or pull out the viewfinder fully. Press MEMORY PLAY. �A stored image is displayed. Press the MENU wheel. The Menu Screen appears. Press the MENU wheel again. The MEMORY Menu appears. Rotate the MENU wheel to select �PROTECT� and press it. The PROTECT Index Screen appears.
3
MEMORY PLAY Button
4
MENU Wheel
V I DEO SYSTEM D I SPL AY MEMOR Y
TO PROTECT AN IMAGE
Before doing the following, perform steps 1 through 4 above.
Display
PROTE CT I MAGE D E L . FRAME D E L . DPOF FORMAT
5
Menu Screen
Rotate the MENU wheel to move the green frame to the desired image and press it. A � � padlock mark appears on the selected image. Repeat this procedure for all images you do not wish to delete by accident. Rotate the MENU wheel upward to select �EXIT� and press it. The normal playback screen appears.
6
END
EXIT
001 F
PROTECT
002 S 003 S
PROTECT Index Screen
NOTE: When the memory is initialised or corrupted, even protected images are deleted. If you do not want to lose
important images, transfer them to a PC and save them.
004 F 005 F 006 F
TO REMOVE PROTECTION
Padlock mark
Before doing the following, perform steps 1 through 4 above.
Normal playback
If Protection is removed
5 6
EXIT
001 F
PROTECT
002 S 003 S
Rotate the MENU wheel to move the green frame to the desired image and press it. The � � padlock mark located above the image disappears and the image is no longer protected. Repeat this procedure for all images from which you wish to remove protection. Rotate the MENU wheel upward to select �EXIT� and press it. The normal playback screen appears.
