No hay comentarios de productos.
The VOL + and the PRESET TUNING 3 buttons have a tactile dot.
About CD-Rs/CD-RWs This unit is compatible with CD-Rs/CD-RWs but playback capability may vary depending on the quality of the disc, the recording device and application software. To handle compact discs Correct Handle the disc by its edge.
4
Presetting Your Favorite Station
�Preset Tuning
You can preset up to 10 stations in FM (5 stations in FM1, 5 stations in FM2), and 5 stations in each AM, TV, WEATHER.
Repeat step 2 to set the minute and press ALARM SET RADIO.
�WAKE UP STA� appears and the preset number flashes on the display.
To Doze for a Few More Minutes
Press SNOOZE�DATE/SLEEP OFF. The CD, radio or buzzer alarm turns off but will be automatically activated again after about 10 minutes. Every time you press SNOOZE�DATE/ SLEEP OFF, the snooze time changes as follows:
5
Press TUNE/TIME SET + or � to select the wake-up station.
Preset number changes in the order as follows:
Presetting a Station 1
Follow steps 1 to 4 in �Playing the Radio� and manually tune in to the station you wish to preset.
P-
AM P1 to 5 TV P1 to 5
FM1 P1 to 5 FM2 P1 to 5
10
20 40
30 50 60
WEATHER P1 to 5
The display shows the snooze time for a few seconds and returns to show the current time. When you press SNOOZE�DATE/SLEEP OFF after the current time appeared, the snooze time starts from 10 minutes again. The maximum length of the snooze time is 60 minutes.
Incorrect
2
Do not touch the surface.
Hold down the PRESET TUNING TUNING button you wish to preset until you hear two short beeps.
FM wire antenna
Do not stick paper or tape nor write anything on the surface. Notes � Discs with non-standard shapes (e.g., heart, square, star) cannot be played on this unit. Attempting to do so may damage the unit. Do not use such discs. � If you press CD u when there is no disc in the CD compartment, �00� flashes for about 5 seconds on the display and the unit turns off automatically.
�P�� is the last received station. You can directly select the desired wake-up station by pressing RADIO/BAND or the PRESET TUNING button while the indication �P�� is not displayed.
6
Example: Display window when you preset FM 90 MHz in the PRESET TUNING 2 button for FM2.
Press ALARM SET RADIO.
The wake-up volume level flashes on the display.
ALARM OFF�
The CD, radio, or buzzer alarm is turned off automatically after 60 minutes.
AC power cord
7 8
i
(headphones) jack
Press TUNE/TIME SET + or � to adjust the wake-up volume level. Press ALARM SET RADIO.
Two short beeps will confirm the setting.
To Stop the Alarm
Press OFF/ALARM RESET x to turn off the alarm. The alarm will come on again at the same time the next day.
The frequency remains on the display for about 10 seconds and then returns to the previous display. To preset another station, repeat these steps. To change the preset station, tune in to the desired station and hold down the PRESET TUNING 1 to 5 button. The new station will replace the previous station on the PRESET TUNING button.
To Set the Buzzer Alarm: 1 Press ALARM SET BUZZER for a few
seconds.
�ALARM� and �BUZZER� appear on the display. After one beep, �ALARM� and the hour will start to flash on the display.
To Deactive the Alarm
Press ALARM MODE repeatedly until CD/ RADIO/BUZZER indicator go off.
Various Modes of CD Playback
You can play tracks repeatedly or in random order. Press CD PLAY MODE. Each press changes the play mode as follows:
2
Press TUNE/TIME SET + or � until the desired hour appears.
To set the hour rapidly, hold down TUNE/ TIME SET + or �.
Tuning in to a Preset Station 1 2 3 4
Press RADIO/BAND to turn on the radio. Press RADIO/BAND to select the band. Press the desired PRESET TUNING button. Adjust the volume using VOL + or � .
After about 10 seconds, the display will return to the previous display but the PRESET TUNING button number will remain. Note Holding down the desired PRESET TUNING button for more than a few seconds in step 3 will replace the previous station on the PRESET TUNING button with the station you tuned in to.
Using the NAP Timer (Count Down Timer)
The NAP timer sounds the buzzer after a preset time duration. Press NAP repeatedly until the desired minutes is displayed. Every press changes the display as follows:
(current time)
3 4
Press ALARM SET BUZZER.
The minute will flash.
Display Indication none
Play mode (normal play) (single repeat)
Repeat step 2 to set the minute and press ALARM SET BUZZER.
Two short beeps will confirm the setting.
NAP indicator Auto Brightness sensor
All the tracks are played once. m
�REP 1�
Note The wake-up volume for the buzzer alarm is not selectable by the setting.
OFF
10 120 90
20 60
30
A single track is played repeatedly. m
To Set the Alarm Mode
Before setting the alarm mode, be sure to set the alarm time. (See �To Set the Alarm Time�.) Repeat the pressing of ALARM MODE to select the alarm mode you want. Every time you press ALARM MODE, CD/RADIO/BUZZER indicator changes in the order as follows:
CD
�REP ALL�
(all repeat)
All the tracks are played repeatedly. m
�SHUFFLE� The CD u button has a tactile dot.
m
(shuffle play)
The NAP indicator turns on, � � and the NAP time is displayed for a few seconds. NAP timer starts counting down the NAP time. When selected NAP time has passed, the beep sound comes on, and the NAP indicator and � � on the display flash.
All the tracks are played once in random order.
Setting the Alarm
This clock radio is equipped with 3 alarm modes�CD, radio and buzzer. Before setting the alarm, make sure to set the clock (see �Setting the Clock and Date�).
To Stop NAP Timer
Press NAP or OFF/ALARM RESET x to turn off the buzzer.
�SHUFFLE REP�
(shuffle repeat)
RADIO BUZZER OFF CD+RADIO CD+BUZZER RADIO+BUZZER CD+RADIO+BUZZER
Setting the Brightness of the Backlight
Press BRIGHTNESS. Each press changes the brightness of the backlight as follows:
(Auto brightness) (high) (middle) (low)
Playing a CD
An 8 cm (3-inch) CD can be played without an adaptor.
All the tracks are played repeatedly in random order.
1 2
Push ZOPEN/CLOSE to open the CD compartment lid and place a disc. Close the CD compartment lid.
To Set the Alarm Time To Set the CD Alarm:
For the CD alarm, the track you specified as the Wake-up track is played first. (If the CD play mode is set to �SHUFFLE� or �SHUFFLE REP�, however, all the tracks are played in random order.)
To Deactive NAP Timer
Press NAP. The NAP indicator and � � go off.
Playing the Radio
�Manual Tuning 1 Press RADIO/BAND to turn on the
radio.
Setting the Sleep Timer
You can enjoy falling asleep to the CD or the radio using the built-in sleep timer that turns off the CD or the radio automatically after a preset duration. Press SLEEP during CD or radio play. You can set the sleep timer to durations of 90, 60,30, or 15 minutes. Every push changes the display as follows:
off (current time) 15 90 30 60
The initial setting is Auto brightness. When Auto brightness is selected, the Auto brightness sensor detects ambient light and automatically adjusts the backlight brightness of the display in three levels.
Push
1
�RADIO� appears on the display.
Press ALARM SET CD for a few seconds.
�ALARM�, �CD� appear on the display. After one beep, �ALARM� and the hour will start to flash in the display.
The alarm time which plays or sounds next is displayed.
To Check the Alarm Setting
For ALARM SET CD, pressing once displays the alarm time, pressing twice displays the wake-up track number, and pressing three times displays the wake-up volume. For ALARM SET RADIO, pressing once displays the alarm time, pressing twice displays the wakeup station, and pressing three times displays the wake-up volume. For ALARM SET BUZZER, pressing once displays the alarm time. The display shows the alarm setting for a few seconds and then returns to the previous display. Alarm time in CD alarm, radio alarm and buzzer alarm is set at AM 12:00 when you purchased the unit.
2
Press RADIO/BAND repeatedly to select the desired band.
Each press changes the band as follows:
2
AM
Setting the Clock and Date
1 2 3 4 5
Plug in the clock radio.
The display will flash �AM 12:00�.
Labeled surface up
FM1
FM2 TV
Press TUNE/TIME SET + or � until the desired hour appears.
To set the hour rapidly, hold down TUNE/ TIME SET + or �.
WEATHER
3
Close the lid
When using FM1 or FM2 preset mode, you may listen to the radio on either mode (See �Presetting Your Favorite Station�).
3 4
Press ALARM SET CD.
The minute will flash.
Press CLOCK for a few seconds.
You will hear a beep and the year will start to flash in the display.
to a station.
Use TUNE/TIME SET + or � to tune in
Repeat step 2 to set the minute and press ALARM SET CD.
Press TUNE/TIME SET + or � until the correct year appears in the display. Press CLOCK once. Repeat steps 3 and 4 to set the month, day, hour, and minute.
After setting the minute, press CLOCK to start the counting of the seconds, and you will hear two short beeps.
Two short beeps sound when the minimum frequency of each band is received during tuning.
The wake-up track number flashes on the display.
5
Press TUNE/TIME SET + or � to select the desired wake-up track number.
The wake-up track number can be set up to 99.
3
Press CD u.
�NCD� and �TRACK 01� appear on the display to indicate that track 1 of the CD is playing.
4
Adjust volume using VOL + or �.
ALARM ON�
If you set the CD alarm and there is no disc in the CD player, the buzzer alarm will sound in its place at the time set. For the buzzer alarm, the beeping of the alarm becomes more rapid and sounds increasing in volume (Gentle Wake function) after every few seconds in three progressive stages. When headphones (not supplied) are plugged into the unit, buzzer alarm through the speakers and the headphones regardless of the alarm mode setting. In this case, the unit will not play a CD or radio. Note When CD, radio and buzzer alarms are set for the same time, the CD alarm takes precedence. If the CD alarm is not set, the radio alarm takes precedence.
When you release TUNE/TIME SET + or � after locating your desired station, the display returns to the previous display after about 10 seconds. To check the frequency of the tuned-in station, press RADIO/BAND and the frequency appears for about 10 seconds. To turn off the radio, press OFF/ALARM RESET x.
6 7 8
Press ALARM SET CD.
The wake-up volume level flashes on the display.
�SLEEP� will appear in the display when the duration time is set. The CD or the radio will play for the time you set, then shut off. When the sleep timer reaches a remaining time of a few minutes, �SLEEP� will flash in the display and the sound output will gradually decrease in volume (Gentle Sleep function). If you press VOL + or � at this time, �SLEEP� will light up and the decrease in the volume will stop. To turn off the CD or the radio before the preset time, press SNOOZE�DATE/SLEEP OFF.
4
Press VOL + or � to adjust the volume.
Press CD u CD u again .** >** Hold down .** Hold down >** . repeatedly** > repeatedly** x
Press TUNE/TIME SET + or � to adjust the wake-up volume level. Press ALARM SET CD.
Two short beeps will confirm the setting.
To display the year and date, press SNOOZE�DATE/SLEEP OFF once for the date, and within 4 seconds press it again for the year. The display shows the date or year for a few seconds and then changes back to the current time. To set the current time rapidly, hold down TUNE/TIME SET + or �. In step 5, when you press CLOCK after the minute setting to activate the clock, the seconds start counting from zero. To change the display to the daylight saving time (summer time) indication Press D.S.T./SUMMER T. � � is displayed and the time indication changes to summer time. To deactivate the summer time function, press D.S.T./SUMMER T. again.
To Pause Resume play after pause Locate the beginning of the current track (AMS*) Locate the next track (AMS) Go back at high speed Go forward at high speed Locate the previous track (AMS) Locate the succeeding track (AMS) Stop play
To Set the Radio Alarm:
Improving the Reception
TV/WEATHER/FM: AM: Extend the FM wire antenna fully to increase reception sensitivity. Rotate the unit horizontally for optimum reception. A ferrite bar antenna is built into the unit. Do not operate the unit over a steel desk or metal surface, as this may lead to interference of reception.
For the radio alarm, the station you specified as the Wake-up station is played.
Other Useful Functions
For Enhanced Bass
The �MEGA BASS� function intensifies the bass sound for richer quality audio reproduction. Turn MEGA BASS toward MAX to increase the bass emphasis.
1
Press ALARM SET RADIO for a few seconds.
�ALARM� and �RADIO� appear on the display. After one beep, �ALARM� and the hour will start to flash on the display.
2
Press TUNE/TIME SET + or � until the desired hour appears.
To set the hour rapidly, hold down TUNE/ TIME SET + or �.
To listen with a headphones (not supplied)
Connect an headphones (not supplied) to the i jack. The sound through the speaker will not be heard.
* AMS = Automatic Music Sensor **These operations are possible during both play and pause.
3
Press ALARM SET RADIO.
The minute will flash.
