SONY ICFCD543RM
Manual de Servicio

ICF-CD543RM SECTION 2 GENERAL
AC power cord Cord clamp

This section is extracted from instruction manual.

Features
� Built-in CD player with CD-R/RW playback function � Dynamic Bass Reflex Sound with the MEGA BASS sound system � TV/WEATHER/FM/AM 4 band PLL (phase locked loop) synthesized clock radio (US model) � FM/AM 2 band PLL (phase locked loop) (Canadian, AEP models) � Easy Preset Digital Tuning with 25 station presets � Easy to set dial cooking timer � Remote Commander Included � D.S.T. (Daylight Saving Time) � Summer time calculation

Setting the Clock
(US model) 1 Plug in the CD kitchen clock radio.

2

The display will flash �AM 12:00�.

Press CLOCK for a few seconds.

You will hear a beep and the hour will start to flash in the display.

TIMER Turn

OFF

MEGA BASS LOW HIGH

3

4
Push

Press TUNE/TRACK�TIME SET + or � until the correct hour appears in the display. Press CLOCK once.
The minute will flash.

5

Repeat steps 3 and 4 to set the minute.
After setting the minute, press CLOCK to start the counting of the seconds, and you will hear two short beeps.

TIMER indicator

OPEN/CLOSE

To set the current time rapidly, hold down TUNE/TRACK�TIME SET + or �. The clock system varies depending on the model you own. 12-hour system: �AM 12:00� = midnight In step 5, when you press CLOCK after the minute setting to activate the clock, the seconds start counting from zero. To change the display to the daylight saving time (summer time) indication Press D.S.T.�SUMMER T.. � � is displayed and the time indication changes to summer time. To deactivate the summer time function, press D.S.T.�SUMMER T. again.

CLOCK

TIMER

PUSH START/STOP

D.S.T.

SUMMER T.

The preset 3, VOLUME + and CD u buttons have a tactile dot.

PRESET TUNING
SELECT PRESET

VOLUME

TUNE/TRACK

RADIO

CD
PLAY MODE

(Canadian, AEP model) 1 Plug in the CD kitchen clock radio.
The display will flash �AM 12:00� or �0:00�.

1

2

3

4

5
TIME SET

ON/BAND

OFF

2

Press CLOCK for a few seconds.
You will hear a beep and the hour will start to flash in the display.

3
Magnet

4

Press TUNE/TRACK�TIME SET + or � until the correct hour appears in the display. Press CLOCK once.
The minute will flash.

5

Repeat steps 3 and 4 to set the minute.
After setting the minute, press CLOCK to start the counting of the seconds, and you will hear two short beeps.

The VOL + and u buttons have a tactile dot. Size AAA (R03) x 2

To set the current time rapidly, hold down TUNE/TRACK�TIME SET + or �. The clock system varies depending on the model you own. 12-hour system: �AM 12:00� = midnight 24-hour system: �0:00� = midnight In step 5, when you press CLOCK after the minute setting to activate the clock, the seconds start counting from zero. To change the display to the daylight saving time (summer time) indication Press D.S.T.�SUMMER T.. � � is displayed and the time indication changes to summer time. To deactivate the summer time function, press D.S.T.�SUMMER T. again.

4