PHILIPS HX2740
Manual de Servicio

DISASSEMBLY ADVICE CONNECTING PIECE 11
remove Wall holder I remove Screw A 2x remove Cover 101

PARTS LIST HX 2740 POS 1 2 3 4 6 7 8 DESCRIPTION WALLHOLDER WATER CONTAINER CONTAINER BRUSH/SPOUTS COVER PRINTED MOUNTING PLATE PUMP UNIT TRAFO 220 - 240 V TRAFO 110 - 127 V TRAFO 220 V, KOREA TRAFO 200 V, HONG KONG 9 HOLDER WATER JET HOUSING PRINTED CONNECTING PIECE STUD P.C.B. COIL CLAMPING RING HAND UNIT WATER JET SET OF JET SPOUTS RECH. MOTOR UNIT NiCd SET OF BRUSHES (2 IN BLISTER) UK, D, F, NL, E, P, I, TR Far East languages + UK 10 11 12 13 14 15 16 17 18 19 Dir. for use Dir. for use SERVICE CODE 4822 256 10189 4822 441 81124 4822 418 10297 4822 442 01903 4822 464 30208 4822 360 10147 4822 148 60303 4822 148 60304 4822 146 10892 4822 146 10893 4822 256 10188 4822 441 12374 4822 526 41098 4822 462 40374 4822 214 70581 4822 157 11413 4822 532 61262 4822 690 10227 4822 529 10439 4822 218 12093 4822 479 20272 4822 736 17096 4822 736 17097

SWITCH 5
remove Wall holder 1 remove Screw A 2x remove Cover 101 remove Screw B and C remove Cover 4 unsolder Wires switch

WATER JET 14
remove remove remove remove remove lift remove Wall holder 1 Screw A 2x Cover 101 Screw B and C Connect.piece 11 Trafo/Mount.plate Ring 13/Tube

MOTOR 7
remove Wall holder I remove Screw A 2x remove Cover 101 remove Screw B and C remove Cover 4 remove Connect.piece 11 unsolder Wires motor lift Trafo/Mount.plate remove Ring 13 / Tube

IMPORTANT

TRAFO 8
remove Wall holder I remove Screw A 2x remove Cover 101 remove Screw Band C remove Cover 4 remove Connect.piece 11 unsolder Wires Motor unsolder Wires switch lift Trafo/Mount.plate

* AFTER THE PRODUCT HAS BEEN REPAIRED, IT SHOULD FUNCTION PROPERLY AND
HAS TO MEET THE SAFETY REQUIREMENTS AND LEGAL REGULATIONS AS LAID DOWN AND ESTABLISHED AT THIS MOMENT.

* PARTS, WITH NUMBERS FROM 100 UPWARDS, CANNOT BE ORDERED SEPARATELY.

P.C.B. 13
remove Wall holder 1 remove Screw A 2x remove Cover 102 remove Screw B and C remove Cover 4 unsolder Wires

COIL 14
remove Wall holder 1 remove Screw C 2 x unsolder Coil

The Toothbrush charging is OFF when the Waterjet motor is ON