Su carrito de compras está vacío
 
English Polski Spanish 
Buscar un manual
 

(p.Ej. AA-V20EG JVC, ZX-7 Sony)
PayPal 1000+ rating Secure, Encrypted Checkout.
 
Usuarios conectados
Actualmente hay 5128 visitantes online.
Productos
Información
Destacado
Inicio >> JVC >> HV-Z29V1H Diagrama del circuito
 
 0 artículo(s) en Su carrito 

JVC HV-Z29V1H
Diagrama del circuito


¡Twitee acerca de este producto y obtenga $1.00 de crédito en la tienda para uso!
  • Contiene diagramas del circuito
  • Descargable
  • Formato PDF
  • Idiomas: English
Precio: $4.99

Descripción del JVC HV-Z29V1H Diagrama del circuito

Conjunto de diagramas del circuito. Los diagramas serán proporcionados en un archivo PDF. El archivo será enviado después de que realice la compra.

The manual is available in languages: English

Not yet ready
You must purchase it first

Opiniones de los clientes
No hay comentarios de productos.

TEXT_PDF_SNIPPET
4.8.8 DEFLECTION CIRCUIT (1) The deflection adjustment using the remote control unit is made on the basis of the initial setting values. The setting values which adjust the screen to the optimum condition can be different from the initial setting values. (2) There are several kinds of adjustment modes with the vertical frequency (Vertical frequency : PAL-50Hz, NTSC-60Hz). a) At first, the adjustment in PAL-50Hz, 900i mode should be done. Then the adjustment for the other vertical frequency mode is corrected in the respective value at the same time. b) However, if the picture quality has not been optimized, adjust each vertical frequency mode again, respectively. c) If adjustment in PAL-50Hz each vertical frequency mode has been done in very high accuracy, the adjustment for the same vertical frequency mode in NTSC-60Hz mode is corrected in the respective value. Adjustment is completed at this time. d) If the picture quality in NTSC-60Hz has not been optimized, adjust each ASPECT mode again in NTSC-60Hz, respectively. In this case, only NTSC-60Hz each ASPECT mode is corrected. (5) Deflection adjustment should surely carry out by setting ASPECT mode to FULL. Since a deflection setup of those other than FULL mode is carried out by SERVICE MENU 8. IP setting, adjustment in ASPECT modes other than FULL mode is unnecessary. Item V. POSITION Measuring instrument Signal generator Remote control unit Test point Adjustment part [4.DEF] 2. V-SHIFT (1) (2) (3) (4) (5) Description Select the ASPECT mode to FULL. Receive the circle pattern signal. Select 4.DEF. Set the initial setting value of < 2. V-SHIFT >. Adjust < 2. V-SHIFT > to become A=B as shown in the figure. (6) Press the [MENU] key to memorize the adjustment value.

A

B

V. SIZE

Signal generator Remote control unit

[4.DEF] 3. V-SIZE

(1) (2) (3) (4)

Receive the crosshatch signal. Select 4.DEF. Set the initial setting value of < 3. V-SIZE >. Adjust < 3. V-SIZE > to become the vertical screen size given below table. (5) Press the [MENU] key to memorize the adjustment value.

Screen size

Picture size 100%

Setting position SCREEN TOP SCREEN BOTTOM

900i 92% 92%

1125i 92% 92%

1350i 92% 92%

602p 92% 92%

1-34 (No.YA016)

Quizás también quiera comprar

$4.99

HV-Z29V1/H JVC
Manual de Usuario

Manual del propietario completo en formato digital. El manual estará disponible para descarga como …
>
Parse Time: 0.211 - Number of Queries: 99 - Query Time: 0.049