This set does not support the repair of individual faulty parts. In care of failure, the main assembly must be replaced. The part code of main assembly is as listed below.
SPECIFICATIONS
Video light segment Power requirements 6 V DC Lamp 3W Maximum luminous intensity Approx. 100 cd Lighting direction Horizontal Lighting angle 20 degrees Continuous lighting time Lighting duration Type of battery pack NP-FM50 NP-QM70 NP-QM91 Used with camcorder (DCR-TRV50)* 55 (50) 115 (100) 200 (180)
FEATURES
� When attached to a camcorder this unit functions as a video light and flash. � Can only be used with a camcorder that has the intelligent accessory shoe attached. � Video light ON/OFF/AUTO is controlled from the Standby mode. When set to AUTO the video light comes on automatically in dark places. � The video flash can only be used on a camcorder with the PHOTO recording function. As the brightness of the flash is automatically adjusted according to the distance of the subjects, your picture does not become whitish with too much brightness.
(Approx. minutes using fully-charged battery pack) * When used in automatic mode with the LCD panel closed. Duration with the LCD panel open is shown in parentheses. Illumination range Approx. 1 m (3 1/5 ft) 100 lux, Approx. 2 m (6 1/2 ft) 25 lux, Approx. 3 m (9 4/5 ft) 12 lux Color temperature 3 000 K Average life of bulb Approx. 100 hours Video flash segment Flash life Approx. 1 500 times Guide no. equivalent to 14 (Memory Photo recording) 3.5 W Approx. 35 � 69 � 53 mm (1 7/16 � 2 3/4 � 2 1/8 inches) (w/h/d) Mass Approx. 70 g (2 1/2 oz) Accessories (supplied) Pouch (1) Operating instructions (1) Accessory (not supplied) Halogen lamp XB-3D Design and specifications are subject to change without notice. Others Power consumption Dimensions