Description Receive a circle pattern signal. Select 3.H-CENT and set the initial setting value. Adjust H-CENT to make C=D. Press the MENU/OK key and memorize the set value.
Adjustment of Signal H. CENTER generator Remote control unit C
D
Adjustment of H.SIZE
4.H-SIZE
17. Receive a cross-hatch signal. 18. Select 4.H-SIZE and set the initial setting value. 19. Adjust H-SIZE and make sure that the horizontal screen size of the picture size is in the bellow table. 20. Press the MENU/OK key and memorize the set value. 21. Input a NTSC VIDEO signal (60Hz) from the EXT terminal, and make sure that the horizontal screen size is in the below table. 22. Press the MENU/OK key and memorize the set value.
ASPECT MODE ADJ. ITEM H-SIZE REGULAR 92%
ZOOM ZOOM (FIXED) 16 : 9 (FIXED)
Adjustment of EW-PIN
6.EW-PIN
Straight
23. Select 6.EW-PIN and set the initial setting value 24. Adjust EW-PIN and make the 2nd.vertical lines at the left and right edges of the screen straight. Also make sure that the 3rd vertical lines are straight. 25. Press the MENU/OK key and memorize the set value.
