PIONEER HTZ-656DV/TDXJ/RB
Manual de Usuario

03

Listening to your system

1 Press SOUND and use / MCACC EQ then press ENTER.

to select

1 Press SOUND and use TONE then press ENTER.

/

to select

2 Use / to select EQ ON or EQ OFF then press ENTER to confirm. � If you select EQ OFF, equalization is set to off but speaker settings (channel delay and channel level) remain in effect. � EQ ON is selected automatically after the Auto MCACC setup is completed.

2 Use / to select the option you want to adjust and press ENTER. The Bass/Treble, Quiet and Midnight features cannot be used at the same time.

Adjusting the bass and treble
Use the tone controls to adjust the bass and treble.

Using the Sound Retriever
When audio data is removed during the WMA/ MP3/MPEG-4 AAC compression process, sound quality often suffers from an uneven sound image. The Sound Retriever feature employs new DSP technology that helps bring CD quality sound back to compressed 2channel audio by restoring sound pressure and smoothing jagged artifacts left over after compression.

� Use / to select BASS or TREBLE then use / to adjust the tone. Press ENTER to
confirm.

Quiet and Midnight modes
The Quiet listening feature reduces excessive bass or treble in a sound source. The Midnight listening feature allows you to hear effective surround sound of movies at low volume levels.

� While listening to a stereo source, press SOUND RETRIEVER to switch the sound retriever on or off.

� After pressing ENTER, the setting switches on/off. � To cancel the Quiet or Midnight listening modes, select BASS/TRE.

Enhancing dialog
The Dialog Enhancement feature is designed to make the dialog stand out from other background sounds in a TV or movie soundtrack.

Boosting the bass level
There are two bass modes you can use to enhance the bass in a source.1

1 2

Press SOUND and use Use
/

/

to select

1 Press SOUND and use / DIALOGUE then press ENTER.

to select

BASSMODE then press ENTER. to adjust the sound then press
ENTER to confirm. Select between OFF, MUSIC or CINEMA.

2 Use / to select the amount of dialog enhancement then press ENTER to confirm. Select between OFF, MID or MAX.

Using the Tone controls
You can change the tonal balance of the sound by using the tone control menu.
Note
1 The Bass Mode is not available when headphones are connected.

16
En