PIONEER HTV-C1
Manual de Servicio

HTV-C1

8. PANEL FACILITIES AND SPECIFICATIONS
Control Center

SURROUND MODE

VOLUME

STANDBY/ON

DISPLAY

INPUT

1

2

11 12

13

14

15 16

17 3

4

5

SURROUND MODE

VOLUME

STANDBY/ON

DISPLAY

INPUT

1

STANDBY/ON switch

- INPUT indicator
When the INPUT 1 terminal is selected, �1� is illuminated; when the INPUT 2 terminal is selected, �2� is illuminated.

Turns the power ON/OFF (Standby).

Auto Standby Function
The unit is equipped with a function that will automatically turn the power ON/OFF (Standby) according to the presence or absence of an input signal. ÷ When the power is ON, the AUTO indicator will be illuminated. Standby status will automatically be engaged if there is no input signal for 5 minutes. ÷ If the selected input terminal receives an input signal while the AUTO indicator is illuminated (Standby status is engaged), the power will automatically be turned ON. ÷ If power to the unit has been turned OFF (Standby status is engaged) using the STANDBY/ON button on either the unit or the remote control, Standby status will remain engaged even if the selected input terminal receives an input signal.

= ST.WIDE indicator
Lights up when Surround Mode is switched to �STEREO WIDE.�

~ DOLBY VIRTUAL indicator
Lights up when Surround Mode is switched to �DOLBY VIRTUAL.�

! AUTO indicator
Lights up when Auto Standby status is engaged.

@ Standby indicator
Lights up when the power is OFF (Standby status) . Goes out when the power is turned ON.

2 SURROUND MODE button
Selects Surround Mode.

# ON indicator
Lights up when the power is turned ON. This is the only indicator that will stay illuminated even when the Display is turned OFF.

3 DISPLAY button
When pressed once, displays each setting in sequence for 2 seconds; when pressed again, switches to Dimmer Mode, changing the brightness of the display.

$ Character display

4 VOLUME+, � buttons 5 INPUT button
Selects the input device.

23