PHILIPS HTS3300K/51
Manual de Usuario

Getting Started
Step 1: Inserting batteries into the remote control
3 1 2

Step 2: Switching on the DVD system
G Press the SOURCE control to select : DISC � FM � MW � TV � AUX � DISC .... OR Press DISC, TV, TUNER or AUX/DI on the remote.

1 Open the battery compartment. 2 Insert two batteries type R06 or AA, 3 Close the cover.

following the indications (+-) inside the compartment.

Switching to Eco Power standby mode G Press STANDBY ON (B). � The display screen will go blank.

CAUTION! � Remove batteries if they are exhausted or if the remote control is not to be used for a long time. � Do not use old and new, or different types of batteries in combination. � Batteries contain hazardous chemical substances, so they should be disposed of properly. Using the remote control to operate the system

Step 3: Setting the TV
After connecting the DVD system to your TV, you have to switch the TV to the correct programme number for the input socket (e.g. �EXT�, �0�, �AV�) in order to view the playback from the DVD system.

1 Press SOURCE control until �DISC�
appears on the display panel.

2 Turn on the TV and set it to the correct
video-in channel. You should see the blue DVD background screen on the TV. � Usually this channel is between the lowest and highest channels and may be called FRONT, A/V IN, VIDEO. See your TV manual for more details. � Or, you may go to channel 1 on your TV, then press the Channel down button repeatedly until you see the Video In channel. � Or, the TV remote control may have a button or switch that chooses between different video modes.

1 Aim the remote control directly at the
remote sensor (iR) on the front panel.

2 Select the source you wish to control by
pressing one of the source select buttons on the remote control (for example TV, TUNER).

3 Then select the desired function (for
example �, S, T).

15

E n g l i s h