When a disc cannot be ejected by method 1, follow the procedure below and remove the Chassis Cover.
< Method 3 >
1. Remove the Top Cover, the Bottom Cover, the Front Assembly, the Reinforce Plate and the Front Bracket. 2. To remove the Chassis Cover, remove 4 Screws A as shown in Fig. D6. 3. Remove a disc.
Screws A Screws A
Chassis Cover
Disc
Fig. D6
Reassembly note of the Chassis Cover: 1. Insert the pin A on the Chassis Cover into the hole A on the Main Chassis as shown in Fig. D7.
Chassis Cover
Pin A
Hole A
Main Chassis
Fig. D7
2. Tighten 4 Screws A as shown in Fig. D6.
