MITSUBISHI HSU449
Manual de Servicio

2-8. A/C HEAD UNIT
DECK POSITION : Normal

LEAD CONNECTOR a a A/C HEAD UNIT

(Removal)

1. Remove the LEAD CONNECTOR of the A/C HEAD UNIT shown in Fig. 2-8. 2. Remove the two screws (a) fastening the A/C HEAD UNIT shown in Fig. 2-8 to remove the A/C HEAD UNIT.

Head

(Installation)
1. Install the A/C HEAD UNIT shown in Fig. 2-8. Note : Never touch the head of the A/C HEAD UNIT shown in Fig. 2-8. Clean dirt on the head with alcohol, if necessary. 2. Install the LEAD CONNECTOR of the A/C HEAD UNIT shown in Fig. 2-8. 3. Perform �3-3. A/C HEAD Adjustment� and �3-4. Phase Adjustment� of �3. Interchangeability Adjustment of the Mechanism.�

Fig. 2-8

2-9. F/E HEAD
DECK POSITION : Normal

F/E HEAD

(Removal)
1. Lift the F/E HEAD shown in Fig. 2-9-1 in the direction shown by arrow A to remove it. Note : Be sure to replace the removed F/E HEAD with a new one.

A Counterclockwise

(Installation)
1. Install the F/E HEAD shown in Fig. 2-9-1. Note : Never touch the head shown in Fig. 2-9-2. Clean it with alcohol, if necessary.

Fig. 2-9-1

F/E HEAD

Head Part Never touch the Head Part.

Fig. 2-9-2

-6-