USER�S GUIDE HS-3(V) HS-6
USING THE STOPWATCH
A Press this button to start and stop elapsed time measurement. B Press this button while an elapsed time measurement is in progress to momentarily freeze a SPLIT or LAP time on the display (timing continues internally). Press again to display the ongoing time measurement. You can repeat the LAP/SPLIT time operation as many times you want. Pressing this button while elapsed time measurement is stopped resets the time to all zeros. C Press this button to toggle between the SPLIT time mode and LAP time mode. � The maximum elapsed time that can be measured is 9 hours, 59 minutes, 59.99 seconds.
� SPLIT timing START 0
a
(a)
b
(a+b)
c
(a+b+c)
STOP (t)
SPLIT (a) SPLIT (a+b) SPLIT (a+b+c) Press B to freeze SPLIT time (a+b). Press B to release. Press A in SPLIT mode. Press B to freeze SPLIT time (a). Press B to release. Press A. Press B to reset.
A SPLIT is the time from the start of an event up to any specific point. A LAP is the time for one segment (lap) of an event.
SPLIT LAP
� 1st-2nd place times
ENGLI
How to operate the stopwatch
� Normal time measurement START 0 Press A. STOP (a) Press A. Press B to reset to zero.
START 0
a b (a)
SPLIT (a)
STOP
(b)
SPLIT release
RESET
a
(b)
Press B when the first runner (a) finishes. Displays time of first runner. Press A when the second runner (b) finishes. Press B to display the time of the second runner. Press B to reset.
Press A in SPLIT mode.
� Net times (Accumulated time excluding loss time) START 0
a
STOP (a) (Lost time)
START (a)
b
STOP (a+b) Press B to reset to zero.
� LAP timing (Lap timing for each segment of an event) START STOP STOP
STOP
0
a
LAP (a)
START (a)
b
LAP (b)
START (b)
c
LAP (c)
(c)
Press A.
Press A.
Press A.
Press A.
Press A in LAP mode.
Press B to freeze LAP time (a). Press B to release.
Press B to freeze LAP time (b). Press B to release.