SHOWVIEW Timer Programming
With the SHOWVIEW system, timer programming is greatly simplified because each TV programme has a corresponding code number which your unit is able to recognize.
B Access the SHOWVIEW screen.
Press PROG.
Before performing the SHOWVIEW Timer Programming:
The front display panel looks like this:
� Make sure that the unit�s built-in clock is set properly. � Insert a cassette with the safety tab in place. The unit will come on automatically. � Turn on the TV and select the video channel (or AV mode). � Slide the TV/S-VHS/DVD switch to the right.
C Enter the SHOWVIEW number.
Press the number keys to enter the SHOWVIEW number of a programme you wish to record.
� If you make a mistake, press & and input the correct number.
The SHOWVIEW number you enter appears on the front display panel with only a 4-digit number:
D Access the SHOWVIEW Program screen.
Press OK, then the SHOWVIEW Program screen appears (if you�re just starting out, �P1� appears).
The front display panel shows the programme number. Pressing " changes the display to the programme start time, the stop time, the date, the tape speed then the channel position.
IMPORTANT
A Select the S-VHS deck.
On the unit Press S-VHS/DVD repeatedly so that the S-VHS indicator lights up. On the remote control Press S-VHS so that the S-VHS indicator lights up.
Make sure the channel position number you wish to record is displayed; if not, or �TV PROG� shows �� ��, see steps B � C of �Guide Program Number Set� on page 31 and set the Guide Program number correctly. � If the number you entered is invalid, �ERROR� appears on the TV screen and �Err� appears on the front display panel. Press & and input a valid SHOWVIEW number.