JVC HR-VP830U
Manual de Usuario

11
SELECT D.S.T. MODE

9
8
� � � ���

You have three choices: a�Select �AUTO� and the adjustment to your VCR�s clock will be made

D.S.T. SELECT

�

�

� � �

according to the incoming signal from the host channel.

=AUTO ON OFF

PRESS (5,�) TO SELECT

b�Select �ON� and the PRESS (MENU) TO END adjustment will be made based on the clock itself. c�Select �OFF� if Daylight Saving Time doesn�t apply to you. Place the arrow next to your choice by pressing CH5� or TIME SCAN 5�, then press MENU and the SemiAuto Clock Set screen reappears.

MENU

CH OK

IMPORTANT
After setting the Semi-Auto clock set, make sure that the VCR is off before the next hour so that the clock can be adjusted. (The clock is automatically adjusted on the hour except at 11:00 PM, midnight, 1:00 AM and 2:00 AM.)

1

2 5 8 0

3 6 9

NUMBER

4 7

Manual
CH

5 6
OK MENU TIME SCAN

At the Override Auto Clock Set screen ( pg. 10), place the arrow next to �MANUAL CLOCK SET� by pressing CHvw or TIME SCAN 5�, then press OK.

SELECT MODE

**AUTO DAYLIGHT SAVING TIME
This function enables automatic adjustment of the VCR�s clock at the start and end of Daylight Saving Time. With Auto DST activated, . . . . . . on the first Sunday of April at 2:00 AM, the clock is adjusted to 3:00 AM. . . . on the last Sunday of October at 2:00 AM, the clock is adjusted to 1:00 AM.

The Manual Clock Set MANUAL CLOCK SET screen is displayed and the first setting that can be set DATE 1/ 1/96 MON begins flashing. TIME � � : � � AM D.S.T. ON Press the appropriate NUMBER keys to set the date and time (if only 1 PRESS NUMBER KEY(0-9) OR (5,�), THEN (OK) digit, press "0" first). Press PRESS (MENU) TO END CHvw or TIME SCAN 5� to set AM/PM and D.S.T. (Daylight Saving Time) to �ON� (automatic adjustment based on VCR�s clock) or �OFF� (if D.S.T. doesn�t apply to you). Press OK after AM/PM and D.S.T. settings. The next setting that can be set begins flashing. When you�re finished with this set-up procedure, press MENU to start the clock.

SET DATE, TIME AND D.S.T.

NOTE:
CH5� and TIME SCAN 5� can be used to perform all operations. (In this case, press OK after each setting.)

Auto

MAKE CORRECTIONS

5

At the Override Auto Clock Set screen, place the arrow next to "AUTO CLOCK SET" by pressing CHvw or TIME SCAN 5�, then power off the VCR. Do not power it on again until the clock has been adjusted. The clock is automatically adjusted on the hour except at 11:00 PM, midnight, 1:00 AM and 2:00 AM. (The clock will be adjusted on the hour based on the time displayed on the VCR, not on the actual real time.)

SELECT MODE

7

To change any of the settings, press OK or TIME SCAN � £ until the item you want to change blinks, then set as in step 6.