Select a channel other than channel 55, 100 or 205 on your DBS receiver.
q
5/8
6
ACCESS DBS RECEIVER BRAND SET SCREEN
C H
2
OK
At the Custom Set screen, press CH5� or SHUTTLE PLUS %� to move the highlight bar (arrow) to �DBS RECEIVER BRAND SET�, then press OK.
CUSTOM SET OVERRIDE AUTO CLOCK SET LANGUAGE SELECT VCR PLUS+ SET-UP DBS RECEIVER OUTPUT =DBS RECEIVER BRAND SET PRESS (5,�), THEN (OK) PRESS (MENU) TO END
1 4 7 8 0
2 5 9
3
3
NUMBER CH
6
Press the appropriate NUMBER keys to enter the DBS Receiver Code from the following list, then press OK. The unit is pre-set to code 80 (RCA) when shipped.
ENTER DBS RECEIVER BRAND
DBS RECEIVER BRAND SET 80
1 ¶ 4
3 7 8
¡
� If the DBS receiver's channel changes as follows, setting is complete: RCA or SONY [ 205 PRIMESTAR [ 55 ECHOSTAR [ 100 � After OK is pressed, the program currently received through the DBS receiver will appear for about 10 seconds. BRAND RCA (DSS) SONY (DSS) PRIMESTAR ECHOSTAR CODE 80 81 90 91
PRESS NUMBER KEY (0-9) THEN (OK) PRESS (MENU) TO END
MENU OK
¢
SHUTTLE PLUS
NOTES:
� Depending on the type of DBS receiver, it is possible that the Controller will not work with it. � If your DBS receiver doesn�t respond to the code, you can�t use the Controller to change satellite channels. In this case, make sure to leave the DBS receiver turned on and tuned to the proper channel before the scheduled start of timer recording. � The VCR can only change the satellite channel through the Controller during timer recording. � If your DBS receiver is one that can�t be operated with a remote control (has no remote sensor), you can�t use the Controller to change its channels. Make sure to leave the DBS receiver turned on and tuned to the proper channel before the scheduled start of timer recording. � For customers in U.S.A.: If you are unable to set the Controller, please contact JVC toll free at 1-800-252-5722.
