|
No hay comentarios de productos.
Timer Recording
Up to 7 timer recording programmes within a month can be made. Before starting: � Set the clock properly. ( 7) � Set �SYSTEM� to the appropriate mode. ( 4) � Load a cassette with the record safety tab intact.
Timer Programming
A Press MENU. Press w e to select the icon
�REC�, then press OK. The programme list appears.
REC
NOTES:
� If all the 7 programmes have already been set, �PROGRAM FULL� appears on the screen. � If there is a conflict in the timer schedule and one programme overlaps with another, the programme starting earlier will be recorded. If the start times are the same, the programme made most recently will be recorded. � If you wish to stop timer recording which has already started, press 1. � After timer recording is completed, the recorder enters the standby mode automatically. � If the tape reaches its end during timer recordings, the recorder stops recording, rewinds the tape and ejects the cassette, then enters the standby mode automatically. � You can programme the timer recording while a regular recording is in progress; the menu screens will not be recorded.
set the channel, date, start time and stop time. Input �0� before any single number entries. � To time-record daily (Monday�Friday) or weekly serials, press w e to select the ARD �DATE� setting, then press OK. Press w e, then press OK. � HR-J585EU only To set the tape speed (SP/LP/IP), press w e to select the tape speed, then press rt. �Intelligent LP Recording (HR-J585EU only)� on page 13.
B Press OK. C Press the appropriate number keys to
D Press MENU. Press MENU again to return to normal screen. E Press 1. The recorder enters timer standby mode. The timer
indicator and standby/record indicator light on the display panel. � If a cassette has not loaded when the recorder enters the timer standby mode, the timer indicator blinks on the display panel.
� 12 �
|
