Basic Playback
(DV deck)
Turn on the TV and select the AV mode.
A Load a cassette.
Make sure the window side is up, the rear label side is facing you and the arrow on the front of the cassette is pointed toward the recorder.
� Do not apply too much pressure when inserting. � The recorder�s power comes on automatically. � If the erase protection switch is set to �SAVE�, playback begins automatically. It takes about 15 seconds until the playback picture appears. � Make sure the VCR indicator appears on the front display panel. If not, press TV/VCR on the remote control to turn on the VCR indicator.
B Select the DV deck.
Press DV.
1 3 2
� The DV button lights on the recorder.
C Find the programme start point.
If the tape is advanced past the start point, press 3 or turn the JOG dial to the left. To go forward, press 5 or turn the JOG dial to the right.
D Start playback.
Press 4.
� The DV playback indicator lights on the recorder.
E Stop playback.
1 2
Press 8. Then press
� The DV playback indicator turns off.
to remove the cassette.
1 4 7
2 5 8 0
3 6 9
3 4 4
Usable cassettes
Only cassettes marked deck. can be used with the DV
NOTE:
3
1 2
When you record a tape on the DV deck with the recording speed set to �LP�, it is recommended to play back that tape back on this DV deck. Digital video recorder from other manufacturers may not be able to play back the tape properly.
