PHILIPS HR4325A
Manual de Servicio

POSSIBLE COMPLAINTS 1) The motor makes an irritating noise. Check if : � The HEPA filters are positioned properly in the air cleaner. : � The filters have to be cleaned or replaced. : � The ROTA filter and / or fan have been properly fitted and can be rotated freely by hand. 2) The overheating device comes into operation. Check : If the filters are blocked and nothing is obstructing the air inlet and air outlet openings. : That the ROTA filter and / or fan have been fitted properly and can rotated freely by hand. In case these problems still remains, replace the motor (item 13.0) and belonging buffers (item 13.1). MAINTENANCE Pre-filter : Wash or vacuum clean the foam pre-filter at least every 2 months. Fluff and /or hairs can also be removed by using a soft brush. Replacement filters are available under service code 4822 480 10116 NEVER USE WET FILTERS. ROTA filter : Wash or vacuum clean the ROTA filter at least every 2 months. If washed with a detergent, rinse the filters with clean warm water and allow the filters to dry in the air thoroughly before reassembly. NEVER USE WET FILTERS. Replacement ROTA filters are available under service code 4822 480 10089 HEPA filter : For a proper operation replace these filters at least every six months. Replacement HEPA filters are available under type number HR4920 and service code 4822 480 10087.

PARTS LIST HR 4325/A POS DESCRIPTION 1 2 3 4 6 7 8 9 10 front cover HEPA filter HR 4920 foam pre-filter control panel + insert 119 pcb control unit microswitch + bracket frame pcb air outlet SERVICE CODE 4822 442 00121 4822 480 10087 4822 480 10116 4822 310 11051 4822 214 12408 4822 310 11052 4822 464 10344 4822 458 10464

front housing 4822 310 10971 consisting of : front housing 10 hole plug 105 safety grill 106 2x foot 107 2x ROTA filter fan consisting of : fan lock washer washer nut M6 nut cover 4822 310 10972 4822 310 10973 12 108 109 110 111 4822 361 10784 4822 361 10785 4822 361 10786 4822 310 10648

11 12

13.0 motor 220 - 240 V motor 110 - 120 V motor 100 V 13.1 set buffers containing: rubber buffers 112 3x metal bracket 113 3x bush 115 3x 14 rear housing consisting of: rear housing foot rear cover housing parts supply pcb supply pcb 220 - 240 V supply pcb 110 - 120 V supply pcb 100 V 14 107 2x

4822 310 10974

15 18 19

4822 442 00122 4822 310 11053 4822 214 12409 4822 214 12411 4822 214 12412

Parts, with numbers from 100 and higher, cannot be ordered separately.

NOTES * N.B. Concerns Panel 4 : for standardisation reasons, the insert 116 of the Air Cleaner HR 4345 is delivered too. * After the product has been repaired, it should function properly and has to meet the safety requirements and legal regulations as laid down and officially established at this moment.

PCS 88 809