|
Usuarios conectados
Actualmente hay 5425 visitantes online.
|
Productos
|
Información
|
Destacado
|
|
No hay comentarios de productos.
Cleaning � For a good and smooth result in epilating, it is essential that the epilating head is cleaned after each use. � Never immerse the appliance in water. � Do not use strong cleaners or scouring agents, petrol, acetone, etc., to clean the plastic housing of your Satinelle. � Never try to remove the epilating discs from the appliance. - Switch the Satinelle off (0) (fig. 8) and remove the mains plug from the wall socket (fig. 14) - For type HP 6404 only: Remove the precision cap (fig. 15). - Press the ribbed section and pull the epilating head from the appliance (fig. 16). - Clean the epilating discs and the parts that have become accessible with the brush (fig. 17). - Put the epilating head back on the appliance. Press the non-marked area besides the ribbed section to make the epilating head snap back to its correct position (�Click!�) (fig. 18). Please note: The epilating head can only be mounted in one direction!
9
|
|
|
> |
|