Twin recording onto MD and tape (TWIN REC) (Main unit only)
All the tracks on a CD can be recorded simultaneously onto an MD and tape. (All-track twin recording) The current track can be recorded from the beginning simultaneously onto an MD and tape. (singletrack twin recording)
Be sure to put the MD recorder and cassette deck in stop mode.
1 Make the preparations for recording.
1 MD : Insert a disc into the MD recorder. TAPE : Perform steps 1 to 3 of the procedure in �Recording on TAPE�. 2 Insert disc in the CD player.
º
2 Check the current play mode of the CD player.
All-track twin recording
If it is in play mode, stop it.
STOP
Single-track twin recording
Select the desired CD track and play it. &
7
To record other tracks using �Single-track twin recording�, repeat steps 2 and 3 for each track.
3 Start recording.
1 Select �REC MODE ?� then �TWIN REC ?�.
volume/ multi control
Turning the knob switches the display contents. 1 CD=MD<NORM> ? 2 CD=MD<HIGH> ? 3 CD=TAPE ? 4 TWIN REC ?
menu
up
down
2 Start recording.
set/demo
÷ With single-track simultaneous recording, when the set/ demo key is pressed, the �MD REC� and �TAPE REC� indicators light and recording starts by returning to the beginning of the current track.
Application section
To interrupt a recording
STOP
At the end of the recording
MD recorder : Stop. Cassette deck : Stop is executed after an unrecorded portion of about 4 sec. has been produced.
7
( Recording and playback will be stopped.) Note that this cassette deck cannot record onto Metal tapes.
Do not turn power off or apply shock or impact while "WRITING" is displayed. If the power cord is unplugged before "WRITING" disappears, the recorded or edited data will be lost.