BROTHER HL-2400C
Manual del propietario

USER�S GUIDE

SAVE SETTINGS Suppose you share this printer with others who want different panel button settings or you use the printer with different settings. Since you can save the current settings in the printer�s memory, you can easily reset the printer to your necessary settings after they are changed. For resetting the printer, see �RESET Button� in Chapter 4. Use the panel buttons to set the configuration of the printer to your needs and then enter this mode menu to save your settings. Two sets of user settings can be saved in the printer as follows: Display Message User Setting Save the current settings as No. 1 in the printer�s memory. Save the current settings as No. 2 in the printer�s memory.

SAVE SETTING 1 SAVE SETTING 2

If you want to check the user settings, you can print out a list of the settings with the Test button. See �TEST Button� in Chapter 4.  Note No user settings have been factory set.

PAGE COUNTER
You can check the total number of printed pages with this mode. When you enter this mode, the display shows the number for a short time and automatically moves to �exit MODE� menu.

EXIT MODE
When you finish setting your desired item in the mode menus, advance to the following message:

MODE exit MODE
Press the Set button to exit from the mode menus to the off-line ready state.  Note Remember that you can exit from the mode menu any time with the Sel button. After you make a setting effective with the Set button, press the Sel button. You will exit from the mode menu to the on-line ready state. The settings you have changed with the Set button are effective after a quick exit.
4�46