Disassembly Procedures
How to disassemble the hanger cover
Screw Stopper B Screw Hanger Cover L Bolt Washer Shaft Spring L
Note: As both ends (the thicker parts) of the shaft will serve as axes of rotation, be careful NOT to damage them. Some scratches in the constricted middle part may be tolerable.
Screw Joint L
Stopper A Click Plate
E
After the bolt removed
is
The shaft can be easily removed if you slide it by holding the point shown in the above photo pressed.
How to disassemble the case holder
Screw Screw Clamper Cover Clamper Spring Connector Screw
To remove the spring these photos. , bend it as shown in