WHIRLPOOL HDD 6710/P
Guía de consulta rápida

GB

HDD 6710/P

QUICK REFERENCE GUIDE
Please also carefully read the �Instructions for Use�.
Programme selection

Starts the drying cycle. The Start/Pause indicator lamp is blinking during the selection phase. Press to confirm the final selection.

Very Wet Load

Wet Load

Load

Drying options
Gentle Reduces drying intensity (recommended for delicate items) Dryness Buzzer Adjustment Signals/Sounds (Adjusts Dryness end of drying cycle Level according to at Intervals wishes) Start Delay Delays the drying cycle start

Turn the programme selector knob to the desired programme. The indicator next to the programme name lights up. The start indicator blinks to show, that the dryer is in selection mode. After the Start/Pause button is pressed the start indicator lamp lights up and the programme starts. Delays the drying cycle start from 1 up to 12 hours. To select the start delay turn the programme selector knob to the desired programme, select the desired options and press the start delay button. With each touch of the start delay button, drying cycle start is delayed by one hour. Press the Start/Pause button to confirm your final selection. Start delay indicator blinks and the count-down is running by reducing the time in one hour steps. The count-down is indicated by the blinking of the start-delay indicator located above the button. During count-down the drum will turn from time to time to redistribute the laundry and the pump may be heard working for a short time. To cancel or to change the previously set time turn programme selector knob to �0� or open the door. After cycle start a default drying time is indicated depending on the selected drying programme and the dryness adjustment. to After 15 seconds the time will be adjusted the real expected remaining time, depending on size, type and humidity of the load. Dryness adjustment is an option to adjust the dryness of the laundry according to your wishes. Select the desired programme and the option dryness level adjustment by pressing the button �+� for more dry or the button ��� for more humid. The selected dryness will be stored as a presetting to the selected drying programme. Using the drying programme next time the pre-setting appears. By pressing the dryness adjustment buttons �+� or ��� the pre-setting can be changed.

Indicative drying times (in minutes)

Kg

Fabric programmes & Drying levels

105� 170� 85� 150� 70� 120� 40� 60� 30� 50�

90� 140� 70� 120� 60� 100� 30� 40� 20� 30�

3.0 6.0 3.0 6.0 3.0 6.0 1.0 2.5 1.0 2.5
Start Delay *

max 6 kg
* * Remaining time indication

max 2.5 kg

115�

100�

2.5

max 2.5 kg

Low drying intensity for delicates and garments labelled .

-

-

Dryness Adjustment

-

-

-

Laundry is aired and refreshed for 30 minutes without heating.

-

-

Time Airing Delicate Synthetics Cotton

-

-

-

Completes drying or

dries single items (suitable for all fabrics).

-

-

The indicator lamp lights up when the filter needs cleaning. Clean the filter at the end of every cycle. Lights up when water container needs to be emptied. The drying cycle is automatically interrupted. Empty the water container. Press the Start/Pause button to restart the dryer and to continue the programme. PROGRAMME SEQUENCE INDICATION The programme sequence is indicated by lamps, switching on when programme step starts and switching off when the programme step is passed.

* Test programmes according IEC 61121.

5019 307 00594