This section is extracted from instruction manual.
Step 3: Setting the time
You must set the time before using the timer functions.
3
Press ENTER.
The minute indication flashes.
1
hH S s
4 5
Press . or > repeatedly to set the minute. Press ENTER.
The clock starts working.
2,4
l
L
3,5
s
j
J
H
S
Tip
If you�ve made a mistake, start over from step 1.
To change the time
The previous explanation shows you how to set the time while the power is off. To change the time while the power is on, do the following: 1 Press CLOCK/TIMER SET. 2 Press . or > repeatedly to select SET CLOCK. 3 Press ENTER. 4 Perform steps 2 through 5 above.
1
Press CLOCK/TIMER SET.
The hour indication flashes.
Note
The clock settings are canceled when you disconnect the power cord or if a power failure occurs.