NOTE ON LEADING THE WIRE (FLAT TYPE) (9 CORE) Lead the wire (flat type) (9 core) properly to prevent the wire from coming out from the right side of the guides on the sub panel or sagging inside of the lid.
lid (TC) guides
wire (flat type) (9 core)
sub panel
NOTE ON INSTALLING THE HP BOARD
Note: Follow the assembly procedure in the numerical order given.
2 HP board
3 three screws (BVTP2.6 � 8)
1 Lead the cable trough out the ditch of the HP board to prevent the cable from contacting with the CD mechanism deck.
