4. Click the �Out� pop-up in the DCA section of the Sound page view and select the �Prog. FX� output.
When the option �Route automatically to Prog FX� on the Options page is enabled, all samples will be routed to the Prog. FX output automatically after you assign the first plugin slot.
5. When you play a few notes you should hear the effect! 6. Using the same general method, you can add Insert effects to the other slots. � When you have activated several effects, you select which effect parameters are shown in the parameter window by clicking in the �Sel� column for the corresponding slot. You can select an output for the Program Insert effects using the popup menu in the Output column.
�
Send effects
You can assign up to 4 Send effects, which are global for all Programs. With Send effects you control the amount of signal sent to each send effect by adjusting the effect send level. Typical send effect types are reverb and delay. � You have 4 Sends that allow you to specify the level of each Send effect for all or all selected samples.
These can be set on the Sound page view.
�
In addition, you have 4 Program Sends that allow you to specify the level of each Send effect for the Program as a whole.
These can be set on the Global and Macro page views.
