JVC GZ-MG20US
Manual de Usuario

8 EN

GETTING STARTED

Attaching the Shoulder Strap
Follow the illustration. 1 Open the velcro strip.

Attaching the Lens Cap
To protect the lens, attach the provided lens cap to the camera as shown in the illustration.

2 Thread the strap through the eyelet. 3 Fold it back and thread it through the strap
guide and the buckle.
� To adjust the length of the strap, loosen and then tighten the strap in the buckle.

NOTE:
To confirm the lens cap is on correctly, make sure the cap is flush to the camera.

4 Slide the strap guide fully towards the eyelet. 5 Close the velcro strip.

1 2
Eyelet Buckle

5 4
Place here during recording.

3
Attaching the Lens Protector
Strap Guide

To protect the lens surface, attach the provided lens protector to the camera as shown in the illustration.