|
No hay comentarios de productos.
42 EN
MANAGING FILES
To copy or move by selecting files then press 49.
7 Select [FILE] with the multi-controller (w/e),
� The index screen appears.
Resetting the File Number
/
/
8 Select a desired file with the multi-controller
(r/t/w/e), then press 49.
� The check mark ( ) appears on the selected file. � To select other files, repeat this step. � The scroll bar can also be used with the zoom lever and rt. ( pg. 28)
By resetting the file number (name), a new folder will be made. The new files you are going to make will be stored in the new folder. It is convenient to separate the new files from previously recorded files. 1 Set the power switch to or .
9 Press MENU to return to the previous screen. 2 Press MENU. The menu screen appears. 10 Select [EXECUTE] with the multi-controller 3 Select [MEMORY CARD SETTING] with the
(r/t), then press 49. multi-controller (r/t), then press 49.
11 File transfer starts.
� To stop the file transfer, press 49, then select [EXECUTE] and press 49.
4 Select [NO. RESET] with the multi-controller
(r/t), then press 49.
12 When [COPYING (MOVING)
COMPLETED] appears, press 49 to finish the operation. To copy or move all still image files in the recording medium
5 Select the file type (video, still image or voice)
with the multi-controller (r/t), then press 49.
6 Select [EXECUTE] with the multi-controller
(r/t), then press 49.
7 Press 49.
7 Select [ALL] with the multi-controller (w/e). 8 Select [EXECUTE] with the multi-controller
(r/t), then press 49.
� If you want to cancel, select [CANCEL], then press 49.
� The new folder (such as [101JVCSO]) will be made and the file number will start again from the new number (such as �PIC_0001.JPG�).
9 File transfer starts.
� To stop the file transfer, press 49, then select [EXECUTE] and press 49.
10 When [COPYING (MOVING)
COMPLETED] appears, press 49 to finish the operation.
|
