8 When you have �nished operation Always follow the procedures below when disconnecting the camera, or turning off the camera/computer power. Failing to do so may cause damage to the camera and computer. 1) Drag & drop the recording medium icon on the desktop into the [Trash] icon. If the con�rmation message appears, click [OK]. 2) Con�rm that the access/charge lamp on the camera does not light or blink. If the access/charge lamp lights or blinks, wait until it is turned off before proceeding. 3) Disconnect the USB cable. 4) Turn off the camera and computer.
3
On the camera, move the set lever to ¡ / ¢ to select [PLAYBACK ON PC], then press down.
ENGLISH
4 5
Double-click [EVERIO_HDD] or [EVERIO_SD]. Select the folder that you want to back up, and drag & drop it into the folder you created in step 1.
File Backup on the Macintosh
Preparation: Connect the camera to the computer with the USB cable. ( pg. 64)
� SD_VIDEO:
Folder that contains video �les. If you want to back up �les individually, open this folder, and drag & drop �les such as [PRG001] one by one. � DCIM: Folder that contains still image �les. If you want to back up �les individually, open this folder, and drag & drop �les such as [PIC_0001.JPG] one by one.
1
On the computer, create a folder to back up �les into.
2
Set the camera�s power/mode switch to ON.
PLAYBACK ON PC
NOTE
BACK UP
For further details on the use of folders, see page 72.
QUIT
