No hay comentarios de productos.
94000-gb.fm5 Page 20 Thursday, September 13, 2001 4:13 PM
MAINTENANCE AND CLEANING
Before cleaning or carrying out maintenance, press the ON/OFF button. 1. Clean the appliance exterior with a neutral detergent. Do not use abrasive detergents. 2. Regularly wipe the door seal and inside of the door with a damp cloth to remove any food residues. If the spray nozzles become clogged with food residues, clean the spray arms as follows: Upper spray arm: � Slacken the fixing nut by turning it counterclockwise A and detach the spray arm by pulling it down B. � Rinse the nozzles. � Remount the spray arm by aligning it with the rotary mounting and insert it. � Tighten the fixing nut by turning it clockwise. Make sure the nut is fully tightened (it should click). Make sure the spray arm rotates freely. Lower spray arm: � Press the two levers inwards which fix the spray arm A and detach by pulling it up B. � � � � Rinse the nozzles. Remount the spray arm by aligning it with the rotor pin and insert it. Push the spray arm down until it is fixed in place. Make sure the two levers are correctly inserted (they should click). Make sure the spray arm rotates freely.
A B
B
A
B A
Cleaning the filters 1. Fully unscrew the wide-mesh central filter by turning it counter-clockwise and extract it A. 2. Fully unscrew the cylindrical filter and extract it from the wide-mesh central filter B (pay due attention to the holes in the bottom of the filter). 3. Remove the fine-mesh filter C. 4. Clean all the components. 5. Reassemble: Insert the cylindrical filter in the wide-mesh central filter. Fit the fine-mesh filter and screw down the filter unit by turning it clockwise. The filter unit must be correctly assembled to ensure good washing results.
C
20
|