29
MENU
Gain Up NORM To record a subject in a dimly lit environment. When it is more convenient to shoot with a less coarse picture although the subject becomes slightly dark. Allows you to shoot dark scenes with no picture brightness adjustment. Usually set to this position. Usually the distance to a subject where the lens is in focus depends on the zoom magnification. Unless there is a distance more than 1m to the subject, the lens is out of focus at the maximum telephoto setting. When set to �ON�, you can shoot a subject as large as possible at a distance of approx. 60 cm. �Depending on the zoom position, the lens may go out of focus. This feature allows you to set the parameters for Self-Timer ( pg. 30) and Time-Lapse recording ( pg. 31). OFF Tele Macro OFF ON
Interval Timer
Rec Time
OFF 15s 30s 1min 5min OFF 1/4s 1/2s 1s 5s
This feature allows you to set the parameters for Animation and Time-Lapse recording ( pg. 31).
JLIP ID NO.
This number is necessary when connecting the camcorder to a device such as a computer using the J terminal (JLIP) ( pg. 51). The numbers range from 01 to 99. Factory setting is 07. ON OFF The tally lamp comes on to signal the start of recording. The tally lamp remains off at all times. pg. 25). pg. 9).
Tally Set Character Date/Time
Allows you to input characters (
Allows you to set the current date and time (
= Factory setting and when the PROGRAM AE Select Dial is set to AUTO LOCK
NOTE:
During shooting in low light, Auto Focus accuracy may decrease even when Gain Up is used. In this case, use Manual Focus ( pg. 21).
