JVC GR-SXM245U
Manual de Usuario

� During charging or discharging, the camcorder cannot be operated. � Charging and discharging is not possible if the wrong type of battery is used. � When charging the battery pack for the first time or after a long storage period, the CHARGE lamp & may not light. Remove the battery pack from the camcorder, then try charging again. � If a fully-charged battery�s operation time remains extremely short, the battery is worn out. Please purchase a new one. � Perform charging where the temperature is between 10°C and 35°C (50°F and 95°F). 20°C to 25°C (68°F to 77°F) is the ideal temperature range for charging. If the environment is too cold, charging may be incomplete. � Charging time varies according to the ambient temperature and the status of the battery pack. � Since the AC Adapter processes electricity internally, it becomes warm during use. Be sure to use it only in well-ventilated areas. � The following operation stops charging or discharging: ! to � � Set the Power Switch �, � � or � �. � Disconnect the AC Adapter from the camcorder. � Unplug the AC Adapter from the AC outlet. � Detach the battery from the camcorder. � Using the optional AA-V15 AC Power Adapter/ Charger, you can charge the BN-V11U/V12U/ V20U/V400U battery pack without the camcorder. However, it cannot be used as an AC adapter. � To avoid interference with reception, do not use the AC Adapter near a radio. � Recording time is reduced significantly when Zoom or Record-Standby mode is engaged repeatedly or the LCD monitor is used repeatedly. � Before extended use, it is recommended that you prepare enough battery packs to cover 3 times the planned shooting time.

Date/Time Settings
1) Set the Power Switch ! to � �. 2) Press the MENU Wheel 1 in. The Menu Screen appears. 3) Rotate the MENU Wheel 1 to select �4TO SYSTEM MENU� and press it to display SYSTEM MENU. Rotate the MENU Wheel 1 to select �4NEXT� and press it to display the next page. 4) Rotate the MENU Wheel 1 to select �DATE/ TIME� and press it. The DATE/TIME Menu appears. 5) To set �YEAR�, �MONTH�, �DAY� or �TIME� (hour/minute), rotate the MENU Wheel 1 to select the desired item, and press it. When the setting begins blinking, rotate the MENU Wheel 1 until the correct setting appears and then press it. The setting stops blinking. 6) When none of these settings (�YEAR�, �MONTH�, �DAY�, �TIME�) blinks, rotate the MENU Wheel 1 to select �EXIT�, and press it. The Menu Screen reappears with the highlight bar on �4RETURN�. 7) Press the MENU Wheel 1 in to close the Menu Screen. � To display the date and time in the camcorder�s display and on a connected TV, see DATE/TIME DISP. ( pg. 19) in CAMERA MENU. � The date/time cannot be stored in memory if the built-in clock battery runs out. Consult an authorized JVC dealer for replacement, or set the date/time as necessary before you start shooting.

1

!
DATE / T I ME Y E AR MON T H DA Y T I ME 2002 JUN 28 PM 8 : 2 0

12-hour indication with AM or PM

EX I T

7