Su carrito de compras está vacío
 
English Polski Spanish 
Buscar un manual
 

(p.Ej. AA-V20EG JVC, ZX-7 Sony)
PayPal 1000+ rating Secure, Encrypted Checkout.
 
Usuarios conectados
Actualmente hay 4986 visitantes online.
Productos
Información
Destacado
Inicio >> JVC >> GRDX97US Manual de Servicio
 
 0 artículo(s) en Su carrito 

JVC GRDX97US
Manual de Servicio


¡Twitee acerca de este producto y obtenga $1.00 de crédito en la tienda para uso!
  • Contiene diagramas del circuito
  • Descargable
  • Formato PDF
  • Manual completo
  • Idiomas: English
Precio: $4.99

Descripción del JVC GRDX97US Manual de Servicio

Manual de servicio completo en formato digital (archivo PDF). Los manuales de servicio por lo general contienen diagramas de circuitos, tarjetas de circuitos impresos, consejos para reparación, diagramas de cableado, diagramas de bloque y lista de refacciones. El Manual de Servicio (a veces llamado Manual de Reparación) es usado principalmente por los técnicos.

Si tan solo quiere saber cómo utilizar su televisión, reproductor de vídeo, reproductor de mp3, etc. Quizá lo que necesita es el Manual del Propietario. Después de colocar la orden le enviaremos las instrucciones de descarga a su dirección de e-mail.

The manual is available in languages:

Not yet ready
You must purchase it first

Opiniones de los clientes
No hay comentarios de productos.

TEXT_PDF_SNIPPET
5.2

TAKE OUT CASSETTE TAPE

The following procedure is a method for taking out the cassette tape in case the cassette tape cannot be ejected due to an electrical failure. The following procedure is a simplified method; therefore, for more reliable operation, it is recommended that you should remove exterior parts so that you can take out the tape without excessive force. (1) Remove the Power Unit (battery or DC cord) from the set. (2) Open the CASSETTE COVER till it is completely opened and fixed. (3) Attach a PVC tape as shown in the figure. NOTE: Be careful of cassette tape damage caused because the Cassette Housing Assembly is moved upward at the unloading end (Eject mode). (4) To set the Slide Deck Assembly to the unloading end, apply DC 3V to the electrode (terminal) on the top surface of the LOADING MOTOR that is seen through a space of VF side. NOTE: Be careful not to attach grease or a similar substance to the surface of the cassette tape on the tape transport system. (5) Wind the cassette tape by directly turning the Reel Disk Assembly (SUP) from the backside of the SLIDE DECK ASSEMBLY by using a sharp tool (Chip IC replacement tool). (6) Confirm that the cassette tape is completely wound, and then peel off the PVC tape from the CASSETTE HOUSING ASSEMBLY and take out the cassette tape. NOTE: To confirm that the cassette tape is completely wound, confirm that one REEL DISK ASSEMBLY (TU) rotates as you rotate the other REEL DISK ASSEMBLY (SUP). (7) Make sure that grease or a similar substance is not attached to the surface of the tape taken out in the procedure (6). Similarly, also make sure that grease or a similar substance is not attached on the MECHANISM ASSEMBLY, especially the tape transport system.

(DC3V)
CASSETTE COVER

TAPE

LOADING MOTOR ASSEMBLY

CASSETTE HOUSING ASSEMBLY

REEL DISK ASSEMBLY (SUP) SLIDE DECK ASSEMBLY

Fig.5-2-1

(No.YF031)1-19

Quizás también quiera comprar

$4.99

GR-DX97US JVC
Manual de Usuario

Manual del propietario completo en formato digital. El manual estará disponible para descarga como …
>
Parse Time: 0.279 - Number of Queries: 104 - Query Time: 0.082