No hay comentarios de productos.
,,,, ,,, ,,,, ,,, ,,,, ,,, ,,,, ,,,, ,,,,, ,,,, ,,,,, ,,,, ,,,, ,,,,,
PIN-UP Pin-Up mode*
EN31
NOTES:
FRAME Snapshot mode with frame*
recording will be performed in the FULL mode during Digital Zoom. However, the flash will not fire. � If Snapshot recording is not possible, �PHOTO� blinks when PHOTO (SNAPSHOT) is pressed. � Even if Programme AE with special effects ( pg. 44) is engaged, certain modes of Programme AE with special
� Even if �MULTI-4� or �MULTI-9� is engaged, Snapshot
effects are disabled during Snapshot recording. In such a case, the icon blinks. � When �REC SELECT� is set to �TAPE & CARD� in the
FULL Snapshot mode with no frame*
System Menu ( pg. 39), still images are recorded not only onto the tape but also in the MultiMediaCard. If a tape is not loaded, they are recorded only in the MultiMediaCard, and if a MultiMediaCard is not loaded, the message �COPYING FAILED� appears and still images are recorded only onto the tape. � If PHOTO (SNAPSHOT) is pressed during tape playback . . . � If a MultiMediaCard is not loaded: The message �COPYING FAILED� will appear, and a still image produced by the Snapshot mode will be displayed, in the same manner as during recording. � If a MultiMediaCard is loaded: A still image produced by the Snapshot mode will be recorded in the MultiMediaCard ( pg. 77). � To reduce the Red-Eye effect of the subject�s eyes when the flash fires, pg. 32. � When a cable or headphone set is connected to the AV OUT connector, the shutter sound is not heard from the speaker, however it is recorded onto the tape.
MULTI-4 Multi-Analyser 4
MULTI-9 Multi-Analyser 9
*:There is the sound effect of a shutter closing.