Protecting Images
The Protect mode helps prevent the accidental erasure of images. When a padlock mark is displayed next to the Picture Quality Mode indication, that image cannot be deleted.
1
VIDEO/DSC Switch (Open the LCD monitor to access this switch.)
P L
Set the VIDEO/DSC Switch to � �, then set the Power Switch to � � while pressing down the Lock Button. �A stored image is displayed. Press the MENU/BRIGHT wheel. The Menu Screen appears. Rotate it to select � MENU� appears. � and press it. �DSC
2
AY OFF
3
Lock Button Power Switch Display
D S C ME NU
Rotate the MENU/BRIGHT wheel to select �PROTECT� and press it. The PROTECT Index Screen appears.
TO PROTECT AN IMAGE
Before doing the following, perform steps 1 through 3 above.
Menu Screen
1R E T URN
I ND E X S L I D E S HOW P RO T E C T DE L E T E F ORMA T
4 5
Rotate the MENU/BRIGHT wheel to move the green frame to the desired image and press it. A � � padlock mark appears on the selected image. Repeat this procedure for all images you do not wish to delete by accident. Rotate the MENU/BRIGHT wheel upward to select �EXIT� and press it. The normal playback screen appears.
EXIT
01
<PROTECT>
02 03
PROTECT Index Screen
04
05
06
NOTE: When the memory is initialized or corrupted, even protected images are deleted. If you do not want to lose important images, transfer them to a PC and save them.
Padlock mark Normal playback
EXIT
01
TO REMOVE PROTECTION
Before doing the following, perform steps 1 through 3 above.
<PROTECT>
02
If Protection is removed
03
4 5
Rotate the MENU/BRIGHT wheel to move the green frame to the desired image and press it. The � � padlock mark located above the image disappears and the image is no longer protected. Repeat this procedure for all images from which you wish to remove protection. Rotate the MENU/BRIGHT wheel upward to select �EXIT� and press it. The normal playback screen appears.