JVC GR-DVL522U
Manual de Usuario

40 EN
SNAPSHOT Button Power Switch

FOR RECORDING (cont.)
Snapshot (For Tape Recording)
This feature lets you record still images that look like photographs onto a tape.

SNAPSHOT MODE SELECTION

1 Set the VIDEO/MEMORY Switch to �VIDEO�,
then set the Power Switch to � MANUAL � while pressing down the Lock Button located on the switch.
Lock Button VIDEO/MEMORY Switch (Open the LCD monitor to access this switch.)

2 Press the MENU/BRIGHT wheel in. The Menu Screen appears. 3 Rotate the MENU/BRIGHT wheel to select � CAMERA�. Press it and the CAMERA Menu
appears.

4 Rotate the MENU/BRIGHT wheel to select �SNAP MODE�, then press it. 5 Rotate the MENU/BRIGHT wheel to select the

desired Snapshot mode, then press it. Rotate the MENU/BRIGHT wheel to select � RETURN� and press it twice. The Menu Screen closes.

SNAPSHOT RECORDING
Display Menu Screen
SNAP MODE � FUL L P I N�UP FRAME

FULL Snapshot mode with no frame

Press SNAPSHOT. �PHOTO� appears while the snapshot is being taken. If you press during Record-Standby . . . ..... �PHOTO� appears and a still image will be recorded for approx. 6 seconds, then the camcorder re-enters the Record-Standby mode. If you press during Recording . . . ..... �PHOTO� appears and a still image will be recorded for approx. 6 seconds, then the normal recording resumes. � Regardless of the Power Switch position (� AUTO � or � MANUAL �), Snapshot recording takes place using the selected Snapshot mode. Motor Drive Mode Keeping SNAPSHOT pressed provides an effect similar to serial photography. (Interval between still images: approx. 1 second) � To remove the shutter sound, �BEEP� on pg. 44, 46. � If Snapshot recording is not possible, �PHOTO� blinks when SNAPSHOT is pressed. � If Program AE with special effects ( pg. 36) is engaged, certain modes of Program AE with special effects are disabled during Snapshot recording. In such a case, the icon blinks. � If SNAPSHOT is pressed when �DIS� is set to �ON� ( pg. 45), the Stabilizer will be disabled. � The Motor Drive mode is disabled when �REC SELECT� is set to � / � in the Menu Screen ( pg. 47). � During tape playback as well, all snapshot modes are available when � COPY� is set to �OFF� in the Menu Screen ( pg. 48). However, the shutter sound is not heard. � During Snapshot recording, the image displayed in the viewfinder may be partially missing. However, there is no effect in the recorded image. � When a cable is connected to the AV connector, the shutter sound is not heard from the speaker, however it is recorded onto the tape.

1

NOTES:

PIN-UP Pin-Up mode

FRAME Snapshot mode with frame

There is the sound effect of a shutter closing.