|
Usuarios conectados
Actualmente hay 5855 visitantes online.
|
Productos
|
Información
|
Destacado
|
|
|
|
|
No hay comentarios de productos.
40 EN
SNAPSHOT Button Power Switch
FOR RECORDING (cont.)
Snapshot (For Tape Recording)
This feature lets you record still images that look like photographs onto a tape.
SNAPSHOT MODE SELECTION
1 Set the VIDEO/MEMORY Switch to �VIDEO�,
then set the Power Switch to � MANUAL � while pressing down the Lock Button located on the switch.
Lock Button VIDEO/MEMORY Switch (Open the LCD monitor to access this switch.)
2 Press the MENU/BRIGHT wheel in. The Menu Screen appears. 3 Rotate the MENU/BRIGHT wheel to select � CAMERA�. Press it and the CAMERA Menu
appears.
4 Rotate the MENU/BRIGHT wheel to select �SNAP MODE�, then press it. 5 Rotate the MENU/BRIGHT wheel to select the
desired Snapshot mode, then press it. Rotate the MENU/BRIGHT wheel to select � RETURN� and press it twice. The Menu Screen closes.
SNAPSHOT RECORDING
Display Menu Screen
SNAP MODE � FUL L P I N�UP FRAME
FULL Snapshot mode with no frame
Press SNAPSHOT. �PHOTO� appears while the snapshot is being taken. If you press during Record-Standby . . . ..... �PHOTO� appears and a still image will be recorded for approx. 6 seconds, then the camcorder re-enters the Record-Standby mode. If you press during Recording . . . ..... �PHOTO� appears and a still image will be recorded for approx. 6 seconds, then the normal recording resumes. � Regardless of the Power Switch position (� AUTO � or � MANUAL �), Snapshot recording takes place using the selected Snapshot mode. Motor Drive Mode Keeping SNAPSHOT pressed provides an effect similar to serial photography. (Interval between still images: approx. 1 second) � To remove the shutter sound, �BEEP� on pg. 44, 46. � If Snapshot recording is not possible, �PHOTO� blinks when SNAPSHOT is pressed. � If Program AE with special effects ( pg. 36) is engaged, certain modes of Program AE with special effects are disabled during Snapshot recording. In such a case, the icon blinks. � If SNAPSHOT is pressed when �DIS� is set to �ON� ( pg. 45), the Stabilizer will be disabled. � The Motor Drive mode is disabled when �REC SELECT� is set to � / � in the Menu Screen ( pg. 47). � During tape playback as well, all snapshot modes are available when � COPY� is set to �OFF� in the Menu Screen ( pg. 48). However, the shutter sound is not heard. � During Snapshot recording, the image displayed in the viewfinder may be partially missing. However, there is no effect in the recorded image. � When a cable is connected to the AV connector, the shutter sound is not heard from the speaker, however it is recorded onto the tape.
1
NOTES:
PIN-UP Pin-Up mode
FRAME Snapshot mode with frame
There is the sound effect of a shutter closing.
|
|
|
> |
|