Following the illustration at left, thread the strap through the top of the eyelet 1, then fold it back and thread it through the buckle 2. Repeat the procedure to attach the other end of the strap to the other eyelet 3, making sure the strap is not twisted. Adjust as shown in the illustration at left 4.
2 ADJUST LENGTH
Tripod Mounting
1 ALIGN AND TIGHTEN
CAUTION:
Align the screw and camera direction stud on the tripod with the camera�s mounting socket and stud hole. Then tighten the screw.
When using a tripod, be sure to open and extend its legs fully to stabilize the camcorder. To prevent damage to the unit caused by falling over, do not use a small-sized tripod.
