Set the Power Switch to �POWER OFF� to turn off the camcorder. Press EJECT to open the cassette holder, then remove the cassette. Close and lock the cassette holder by pressing PUSH. Close and lock the LCD monitor. Slide BATT. RELEASE to remove the battery pack. Slide the LENS COVER open/close switch to close the lens cover.
Cleaning The Camcorder
CLEAN EXTERIOR
1
Remove.
Wipe gently with a soft cloth.
CLEAN LCD MONITOR
2 3 4
Open the LCD monitor and wipe gently with soft cloth. Be careful not to damage the monitor. Close the LCD monitor.
CLEAN LENS
Blow it with a blower brush, then wipe gently with lens cleaning paper.
REMOVE EYEPIECE
Turn the eyepiece counterclockwise and pull it out. Marks
CLEAN VIEWFINDER
5 6
Remove dust using a blower brush.
RE-ATTACH EYEPIECE
Align the marks, re-attach the eyepiece and turn it clockwise.
NOTES:
� Avoid using strong cleaning agents such as benzine or alcohol. � Cleaning should be done only after the battery pack has been removed or other power units have been disconnected. � Mold may form if the lens is left dirty.
