3.2.13 REMOVING THE TEMP PWB (Fig.2) � Remove the REAR COVER. (1) Pull out the TEMP PWB from the claw of the TOP FRAME. 3.2.14 REMOVING THE CONTROL PWB (Fig.2) � Remove the REAR COVER. (1) Remove the 2 screws [A]. (2) Remove the CONTROL KNOB. (3) Remove the CONTROL PWB from the TOP FRAME. 3.2.15 REMOVING THE CHASSIS BASE AND TOP FRAME (Fig.2) � Remove the REAR COVER. � Remove the BACK SHIELD. � Remove the SIDE SHIELD. � Remove the TERMINAL BRACKET. � Remove the BACK BRACKET. (1) Remove the 2 screws [B]. (2) Remove the CHASSIS BASE. (3) Remove the 2 screws [C] and the 2 screws [D]. (4) Remove the TOP FRAME. 3.2.16 REMOVING THE LED PWB (Fig.2) � Remove the REAR COVER. � Remove the BACK SHIELD. � Remove the SIDE SHIELD. � Remove the TERMINAL BRACKET. � Remove the BACK BRACKET. � Remove the CHASSIS BASE. � Remove the TOP FRAME. (1) Remove the 1 screw [E]. (2) Remove the LED PWB. 3.2.17 REMOVING THE LCD PANEL UNIT (Fig.2) � Remove the REAR COVER. � Remove the BACK SHIELD. � Remove the SIDE SHIELD. � Remove the TERMINAL BRACKET. � Remove the BACK BRACKET. � Remove the CHASSIS BASE. � Remove the TOP FRAME. (1) Remove the 2 screws [F] and the 2 screws [G]. (2) Remove the BOTTOM FRAME. (3) Remove the LCD PANEL UNIT from the FRONT PANEL.
