WHIRLPOOL GGW9260PL0
Manual de Usuario

When using Air Only

Additional Features
WRINKLE SHIELD� Feature
When you are unable to remove a load of clothes from the dryer as soon as it stops, wrinkles can form. The WRINKLE SHIELD� feature periodically tumbles, rearranges and fluffs the load to avoid wrinkles. s Press the WRINKLE SHIELD� feature to get up to 120 minutes of heat-free, periodic tumbling at the end of a cycle.
s

s s s

Check to see that coverings are securely stitched. Shake and fluff pillows by hand periodically during the cycle. Dry item completely. Foam rubber pillows are slow to dry.

NOTE: Automatic Cycles are not available when using the Air Only setting.

Signals
The Dry Only setting produces an audible sound when the drying cycle is finished. Promptly removing clothes at the end of the cycle reduces wrinkling. The Damp & Dry Signal is useful when drying bedsheets/linens in a mixed load or large items in the �Bulky Items� cycle. When the signal sounds, rearrange the load inside the dryer, close the door and restart the dryer to finish the drying cycle. Rearranging the load will aid in the drying process. For the �Bulky Items� cycle, �Damp & Dry� is preset to ON.

Stop at any time by pressing the WRINKLE SHIELD� feature or opening the dryer door. For the Casual Cycle, the WRINKLE SHIELD� feature is preset to �ON.� The other Automatic Cycles will retain the WRINKLE SHIELD� feature setting. (For example, if you select the WRINKLE SHIELD� feature in the Normal cycle, the WRINKLE SHIELD� feature will be on the next time you select the Normal cycle.)

s

NOTE: If you do not select the WRINKLE SHIELD� feature, the dryer stops after the cool down period.

Temperature
Temperature settings are used with the Manual Cycles. Press TEMPERATURE until the desired temperature setting glows. Temperature settings cannot be used with the Automatic Cycles.

Press and release the SIGNALS button to change the setting. NOTE: When the WRINKLE SHIELD� feature is selected and the Signals setting is on, an audible sound will emit every 5 minutes until the clothes are removed, or the WRINKLE SHIELD� feature is finished.

Drying Rack
The drying rack is useful for drying items you would not necessarily want to tumble dry or that you would normally line dry (for example, sweaters). To use the drying rack Do not remove the lint screen. 1. Open dryer door.

Air Only
Use the Air Only setting for items that require drying without heat such as rubber, plastic and heat-sensitive fabrics. This chart shows examples of items that can be dried using Air Only. Type of Load Time* (Minutes) 20 - 30 20 - 30

Foam rubber - pillows, padded bras, stuffed toys Plastic - Shower curtains, tablecloths Rubber-backed rugs Olefin, polypropylene, sheer nylon *Reset time to complete drying, if needed.

A
A. Front edge

40 - 50 10 - 20 2. Place drying rack inside dryer drum, positioning the back wire on the ledge of the inner dryer back panel. Push down on front edge of drying rack to secure over the lint screen.

A

A. Dryer back panel

18