PIONEER GEXP920XM
Manual de Usuario

XM tuner

Additional Information

Additional Information

Additional Information

Selecting the channel in the channel category
Channels are organized into various program categories, e.g. Rock, Classic, Jazz. You can search between different categories, and then search among channels within each channel category. 1 Select the channel category select mode. (Refer to �Switching the channel select mode� above.) 2 Press BAND to return to the previous

Display the ID code (Radio ID)
Each XM tuner is identified with a unique Radio ID. You will need the Radio ID when activating XM service or when reporting a problem. 1 Select the channel number select mode. (Refer to �Switching the channel select mode� .) 2 Press or to select the channel

Radio ID
Refer to the following chart to verify each Radio ID, before displaying them on the following head units. DEH-P5500MP DEH-P550MP DEH-P560MP DEH-P4700MP DEH-P4600MP DEH-P4500MP DEH-P3700MP DEH-P360 DEH-P350 DEH-P26 DEH-P250 DVH-P5000MP DEH-P470MP DEH-P460MP DEH-P450MP DEH-P3600 DEH-P3500 DEH-P2600 DEH-P2500 DEH-P25

ID 1 2 3 4 5 6 7 8 9

Display

ID I (Not used.) J

Display ��

Messages
When problems occur with the XM tuner, a message appears on the display. Refer to the table below to identify the problem, then take the suggested corrective action.
Message Cause The XM antenna is not connected. A short-circuit occurring in the antenna or the surrounding antenna cable. UPDATING Radio is being updated with latest encryption code. XM signal is too weak at the current location. Unit is acquiring audio or program information. OFF AIR The channel currently selected has stopped broadcasting. The user has selected a channel number that does not exist or is not subscribed to. There is no artist name/feature, song/program title, or channel category associated with the channel at that time. Action Check whether the XM antenna cable is attached securely. Make sure that there is nothing unusual with the antenna or antenna cable. Turn the ignition off and then on. Wait until the encryption code is fully updated. Channels 000 and 001 should function normally. Wait until the car reaches a location with a stronger signal. Wait until the unit has received the information. Select another channel. Automatically switches to Channel 001.

Specifications
General
Power source ...................... 14.4 V DC (10.8 � 15.1 V allowable) Grounding system .............. Negative type Max. current consumption ............................................. 2.0 A Dimensions (W � H � D) ..... 179 � 27 � 139 mm (7 � 1 � 5-1/2 in.) Weight ................................. 0.56 kg (1.24 lbs)

K L M N O (Not used.) P Q R ��

ANTENNA

XM tuner
Frequency range ................. 2,332.50 � 2,345.00 MHz Usable sensitivity Satellite ....................... � 105 dBm Terrestrial .................... � 102 dBm

display. 3 Press or to select the desired channel category. Once you select a channel category, the unit searches for channels in that category. During search, the channel category doesn�t immediately change even if you press the button. To successively change the channel category, continue pressing the button. 4 Press or to select the desired channel in the selected channel category. The channel number moves up or down in the selected channel category. Channels that cannot currently be selected are skipped, and the next channel in that channel category is selected.

number zero (CH 000). The ID code is displayed. Carefully check your
XM Radio ID. The letters F, I, O, and S are not used.

NOSIGNAL LOADING

Audio
Signal-to-noise ratio ........... 90 dB (IHF-A network) Separation .......................... 85 dB

Notes � If you select another channel, display of the ID code is canceled. � Display of the ID code repeats displaying RADIO ID and the ID code one after the other.
0 A B C D E F (Not used.) G H ��

�������� S (Not used.) T U V W X Y Z �� ����

Antenna
Power source (Provided by the satellite line) ............................................. 4.9 V DC (4.4 � 5.4 V allowable)

No action needed.

Max. current consumption ............................................. 0.1 A Type ..................................... Active type Dimensions Base (W � H � D) ........ 29 � 14 � 40 mm (1-1/8 � 1/2 � 1-5/8 in.) Cord ............................. 5 m (16 ft. 5 in.) Weight ................................. 0.06 kg (0.13 lbs)

Note When the messages that is not listed above are displayed, refer to the operation manual supplied with the head unit.

Note Due to possible improvements, specifications and design are subject to change without notice.

En

En

En