WHIRLPOOL GDU8700XT0
Manual de Usuario

CLEAN CYCLE LIGHT

CYCLE CONiROL

KNOB

HI-TEMP

WASH Option
parts of the cycle will be longer if the water is heated. HI-TEMP washing is automatic in POTS & PANS.

When this option is selected, water for the main wash and the final rinse is heated tol45� F (63� C). Washing and rinsing action in those

The AIR DRY Option
Air in the dishwasher is automatically heated during the �dry� part of all cycles. If the AIR DRY Option is selected, air in the dishwasher is not heated. Using this option helps save energy, but dishes ta ke longer to dry [overnight) and some water spotting may result. Some items (such as plastics] may need towel drying. For best results, use a liquid rinse aid such as Jet-Dry.�

The RESET OPTIONS

Button

If you want to change a selected option, push the RESET OPTIONS Button. Re-select an option, if desired.

Using DEIAY START
1. Push desired 2. Push desired Cycle Option Selector Selector Button. Button(s). 3. Turn Control Knob clockwise to the number of hours (from 1 to 4 hours) you want the dishwasher to delay before the selected cycle starts.

4. Close and latch the door. NOTES : l You can add items while time is counting down, Close and latch the door. The timer will not advance if the door is unlatched. l RINSE & HOLD and LOW ENERGY WASH Cycles cannot be delayed. 2. Turn the Cycle Control Knob clockwise to the cycle you want. 3. Be sure the detergent dispensers are filled properly for the new cycle 4. Press door firmly to latch it. The dishwasher will automatically start the new cycle. To turn liaht off. turn the Control wise slightly until the light goes off Knob clock-

Changing a setting
You can any cycle. change a setting anytime during 1. Lift up on the door latch to stop the cycle. Don�t open the door until the spray arms stop spinning.

The CLEAN Signal Light
The CLEAN Signal Light will come washing cycle is complete. on when a

To add a dish after starting
1. To be sure the added item is washed and rinsed, make sure the Cycle Control Knob has not passed LOW ENERGY WASH. 2. Lift up on the door latch to stop the cycle. Don�t open the door until the spray arms stop spinning. 3. Open the door and add the dish. 4. Close the door. Do not latch it. Wait 30 seconds for air in the dishwasher to warm up. This helps reduce the amount of moisture that can come from the vent when restarting the cycle. 5. Press door firmly to latch it. The dishwasher will start from where it stopped.

9