To Charge/Recharge
� Fully charge Groomer before using for the first � Battery performance is best if you recharge
time or after non-use for a long period of time.
only when the battery is (almost) completely empty. � Charging or recharging at temperatures below 40�F or higher than 95�F adversely affects lifespan of the battery. � Continuously recharging Groomer will reduce lifespan of battery. 1 Be certain Groomer is OFF. 2 You may charge the Groomer:
� In the charging stand by inserting the appliance
plug into the socket located in the bottom of the charging stand (fig. 2). Place the Groomer directly on the charging pin in the stand (fig. 3). � By inserting the appliance plug directly into the Groomer (fig. 4). 3 Plug charging plug into any 120V AC outlet. Use only the cord provided. 4 After a few moments, the green Charging Indicator Light on the power plug will light to indicate the Groomer is charging (fig. 5).
� It will take approximately 10 hours to fully
charge the Groomer for a cordless trimming time of up to 35 minutes. � Disconnect the cord and unplug from electrical outlet. Optimize the working life of the battery
� After the Groomer has been charged for the
first time, do not recharge the Groomer between trimming sessions. Continue using it until the battery is completely empty. � Do not charge for more than 24 hours. � Do not keep cord permanently plugged in. � Discharge/run down the battery completely twice a year by letting the motor run until it stops. � If the Groomer hasn�t been used for a long period of time, it must be recharged for a full 10 hours.
Cordless Trimming
1 Charge according to directions. Unplug Personal Groomer from outlet. 2 Slide ON/OFF switch ON to begin trimming. 3 If the battery is empty and you want to trim your beard, charge the Groomer for at least 3 hours and you will have enough power for one use (10 minutes).