AEG Favorit 80850i-W
Manual de Usuario

Installation and Connection Instructions

� Depending on type, the dishwasher is to be installed as follows:

Dishwashers That Can Be Integrated
(see installation template supplied)

3

The door of the appliance can be fitted with a wooden/facing panel with the following dimensions:
Width: Thickness: Height: (variable) 591 � 594 mm 16 � 24 mm dependent on � Aperture height � Plinth height � The adjustment so that the unit matches the height of the adjoining units The exact height of the adjoining units must be measured at the place of installation. Weight: max. 8 kg

1

If the facing panel is longer than 600 mm, the door of the appliance cannot be opened completely (the facing panel bumps against the plinth). If this is the case, the plinth must be cut out (see installation template) or the brace adapter for the extra long door BLT 60 must be used. You can obtain this with the E No. 911 239 008.

Built-In Dishwasher
(see enclosed installation instructions)

Free-Standing Appliances

1

� can be set up as stand-alone without additional installation. If the dishwasher is set up next to a gas or coal cooker, a heatinsulating, non-flammable plate must be mounted between the dishwasher and the cooker, flush to the top edge of the work surface (depth 57.5 cm). The plate should have aluminium foil on the side facing the cooker.

37